Replacing The Base Panel; Procedure - Dell Alienware 17 R3 Service Manual

Replacing the base panel

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Connect the battery cable to the system board.
2 Slide the tabs on the base panel into the slots on the computer base and
snap the base panel into place.
3 Tighten the captive screws that secure the base panel to the computer
base.
Before working inside your
computer. For more safety best
computer.
17