ICON weider 8515 WESY87150 User Manual page 6

2. Slide the Front Upright (42) onto the 5/16Ó x
2 1/2Ó Carriage Bolts (1) in the Base (4).
Hand tighten a 5/16Ó Nylon Locknut (3) onto
each Carriage Bolt. Do not tighten the
Nylon Locknuts yet.
Press a 1Ó Square Inner Cap (65) into the
Front Upright (42).
Attach the slotted end of the Brace (87) to the
5/16Ó x 2 1/2Ó Carriage Bolt (1) in the
Stabiliser (5). Hand tighten a 5/16Ó Nylon
Locknut (3) onto the Bolt. Do not tighten the
Nylon Locknut yet.
Attach the other end of the Brace (87) to the
Rear Upright (56) with a 5/16Ó x 2 3/4Ó Bolt
(11), a 5/16Ó Flat Washer (8), and a 5/16Ó
Nylon Locknut (3). Do not tighten the Nylon
Locknut yet.
3. Press a 2Ó Square Inner Cap (27) into the end
of the Top Frame (55). Press a 1 3/4Ó Square
Inner Cap (44) into each end of the crossbar
on the Top Frame. Press two 1Ó Round Inner
Caps (49) into the top of the crossbar.
Attach the Top Frame (55) to the Front Upright
(42) and the Rear Upright (56) with four 5/16Ó
x 2 3/4Ó Bolts (11), four 5/16Ó Flat Washers
(8), and four 5/16Ó Nylon Locknuts (3).
Tighten all Nylon Locknuts used in steps 1
through 3.
4. Press two 1 1/2Ó Bushings (82) into the Left
Pedal (79). Attach a Pedal Cover (81) to the
Left Pedal with a 1/2Ó Metal Screw (77).
Assemble the Right Pedal (not shown) in the
same manner.
6
2
42
56
8
11
3
65
3
87
3
5
4
1
1
Slot
3
11
11
8
27
8
44
55
49
44
Crossbar
3
3
42
56
4
77
81
79
82
LOCKING THE WEIGHT STACK
When the home gym system is not in use, the Lock
Pin (90) and Lock (91) should be attached. Insert the
Lock Pin through a Weight Guide (62). Attach the
Lock to the Lock Pin.
62
91
90
19