ICON weider 8515 WESY87150 User Manual page 13

REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
3/4" Round Inner Cap (34)Ð4
1" Round Inner Cap (49)Ð4
1" Round Cover Cap (70)Ð4
This chart is provided to help you identify the small parts used in assembly. Important: Some parts
may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags,
check to see if it has been pre-assembled. The number in parenthesis below each part refers to the
5/8" x 9/16" Spacer (73)Ð1
key number of the part. The second number refers to the quantity needed for assembly.
1/2" x 3/4" Spacer (61)Ð2
5/8" Round Cover Cap (85)Ð2
1" x 7/8" Plastic Bushing (75)Ð2
5/8" Spacer (86)Ð2 1" Square Inner Cap (65)Ð1
1 3/4" Square Inner Cap (44)Ð6
1 1/2" Square Inner Cap (32)Ð2
IMPORTANT: The assembly is divided into four stages: 1) frame
assembly, 2) press and butterfly arm assembly, 3) cable and pulley
assembly, and 4) seat and backrest assembly. The hardware for each
stage is packaged separately. WAIT UNTIL YOU BEGIN EACH
ASSEMBLY STAGE TO OPEN THAT PARTS BAG.
2" Square Inner Cap (27)Ð2
2" Square Outer Cap (51)Ð2
WESY87150 R1297A