Advanced Routing; Static Routing List - TP-Link TL-WR1043ND User Manual

4.15 Advanced Routing

Figure 4-83 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-83: Static
Routing List and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.

4.15.1 Static Routing List

Choose menu "Advanced Routing → Static Routing List", and then you can configure the
static route in the next screen (shown in
network information must travel to reach a specific host or network.
To add static routing entries:
1. Click Add New... shown in
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host that

you want to assign to a static route.
TL-WR1043ND
Figure 4-84
Figure 4-84 Static Routing
, you will see the following screen.
Figure 4-84
Figure 4-85 Add or Modify a Static Route Entry
-84-
450Mbps Wireless N Gigabit Router
). A static route is a pre-determined path that