Dhcp; Dhcp Settings - TP-Link TL-WR1043ND User Manual


User Name - The user name is guest for Guest Network, it can't be changed.

Password - Enter the password in the Password field. The password must be composed of
alphanumeric symbols not exceeding 15 characters in length.

Confirm Password - Re-enter the password here.

Storage Authority - Authority of user: Read Only or Read and Write.

Name - This folder's display name.

Partition - The volume that the folder resides.

Folder - The real full path of the specified folder.

Edit - You can edit the share folder by click edit button.

Delete - You can delete the share folder by click delete button.

Note:
If you want guests visit folders of Guest Network Storage Sharing with guest account, you must
enable Access shared storage with password on the page USB Settings->Storage Sharing, or the
guests can't access to the Guest Network Storage Sharing.
The max share folders number is 6. If you want to share a new folder when the number has
reached 6, you can delete a share folder and then add a new one.
4.8

DHCP

Figure 4-31 The DHCP menu
There are three submenus under the DHCP menu (shown in
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
4.8.1

DHCP Settings

Choose menu "DHCP→DHCP Settings", and then you can configure the DHCP Server on the
page (shown in
Figure 4-32
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the router on the LAN.
TL-WR1043ND
Figure 4-30 Guest Network Storage Sharing
).The router is set up by default as a DHCP (Dynamic Host
-45-
450Mbps Wireless N Gigabit Router
): DHCP Settings, DHCP
Figure 4-31