TP-Link TL-WR1043ND User Manual page 48

To filter wireless users by MAC Address, click Enable. The default setting is Disable.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear as shown in
Figure 4-24 Add or Modify Wireless MAC Address Filtering entry

MAC Address - The wireless station's MAC address that you want to filter.

Status - The status of this entry either Enabled or Disabled.

Description - A simple description of the wireless station.
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX
00-0A-EB-00-07-8A.
2. Enter a simple description of the wireless station in the Description field. For example:
Wireless station A.
3. Status - Select Enabled or Disabled for this entry on the Status drop-down list.
TL-WR1043ND
Figure 4-23 Wireless MAC Filtering
(X is any
-39-
450Mbps Wireless N Gigabit Router
Figure 4-24
hexadecimal digit).
:
For example: