TP-Link TL-WR1043ND User Manual page 33

IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

Subnet Mask - Enter the subnet Mask provided by your ISP in dotted-decimal notation.

Usually, the Sub Mask is 255.255.255.0.
Default Gateway - Enter the gateway IP address provided by your ISP in dotted-decimal

notation.

MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. It is not recommended that you change the default MTU Size unless required
by your ISP.
Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal

notation provided by your ISP.
3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you
should enter the following parameters (Figure 4-10):
TL-WR1043ND 450Mbps Wireless N Gigabit Router
Figure 4-9 WAN - Static IP
-24-