Chapter 2. Before Installation ....................2 Chapter 3. Installation for Windows OS ................... 2 Chapter 4. Application for Windows OS .................. 7 4.1 To Launch/Exit the TP-LINK USB Printer Controller …………………………………………..……...7 4.2 To Utilize the TP-LINK USB Printer Controller …………………………………………………………..8 4.2.1 To Print ............................8 4.2.2 To Scan ...........................
Router. Typical Topology Note: The client utility TP-LINK USB Printer Controller supports Windows 7 32/64 bit, Windows Vista 32/64bit, Windows XP 32/64bit, and Mac. Before connection, please check the Printer Compatibility List to verify whether your printer is supported by the Router.
Computer with Windows XP/ Windows Vista/ Windows 7/ Mac Note: For Mac or Windows computers that do not have CD-ROM drive to run the resource CD, please download the relevant software from our website: www.tp-link.com. Please refer to Appendix: Troubleshooting for this. ...
Page 6
5. Check the LED lights and click NEXT. 7. Please wait a moment for the installation preparation. 6. Click NEXT to start installing the printer 8. Click Next and go on to install the TP-LINK share software. USB Printer Controller.
Page 8
Router now. Note: In your LAN, each computer that wants to share the print server should also install the TP-LINK USB Printer Controller. Please follow the previous steps to configure other computers in your LAN.
Chapter 4. Application for Windows OS TP-LINK USB Printer Controller is used to operate the USB Printer on your own computer. After successful installation, the icon will appear on the desktop of your computer.
Application for Windows OS 4.2.2 To Scan There are two methods available to realize the scanning function.
Page 14
Application for Windows OS Step 3: Select the type of picture you want to scan, and then click Scan.
Page 15
Application for Windows OS Step 5: Wait a while for the scan process.
Page 16
Application for Windows OS Method Two: Connect for Scanning Note: If you choose this method for scanning, no one else in your LAN can share the scanner or MFP to either print or...
Page 17
Application for Windows OS Step 3: After finishing your scanning task, please do remember to click the tab Disconnect for Scanning...
Page 18
Application for Windows OS Step 3: You will be prompted a window that transmits your request.
With this setting, the TP-LINK USB Printer Controller will run automatically every time you log on your computer. About Go to About -> About, a window will pop up and display some relevant information about this Control Center.
To exit the USB Printer Controller, you have two ways: Click TP-Link USB Printer Controller -> Quit, when the printer controller is on the process. Or you can press the keyboard command + Q to quickly exit the controller.
Page 28
Application for Mac OS Step 2: Click Tools and then select Network Scanner.
Page 29
Application for Mac OS Step 4: Wait a while for the scan process.
Page 30
Application for Mac OS Method Two: Connect for Scanning Note: If you choose this method for scanning, no one else in your LAN can share the scanner or MFP to either print or...
Page 31
Application for Mac OS Step 3: After finishing your scan task, please do remember to click the tab Disconnect for Scanning to...
Page 32
Application for Mac OS Step 3: You will be prompted a window that transmits your request.
6.2.3 Other functions/ settings About Go to TP-Link USB Printer Controller -> About; a window will pop up and display some relevant information about this printer controller. ...
Page 34
Open at Login Left-click and hold the icon in the dock for a while, until you can select Option > Open at Login. With this setting, the TP-LINK USB Printer Controller will run automatically every time you log on your Mac. -32-...
Appendix: Troubleshooting 1. Where can I find the printer compatibility list? Go to our website www.tp-link.com, then go to Products ->Wireless, find your product model and go to Download -> Document -> Printer Compatibility List. -33-...
Page 36
2. Where can I find the relevant software for installation? Go to our website www.tp-link.com, then go to Products ->Wireless, find your product model and go to Download ->Software -> Utility. Then next web page will be loaded, where you can select the USB Printer Controller_Utility and download it.
Page 38
Web-based management page. See the following instructions (Here takes that in Windows 7 for example): 1) Make sure you have a PC or notebook connected to the wireless Router, either via wireless or wired connection. 2) Launch the TP-LINK USB Printer Controller, highlight the Router and click the tab Configure Server.