TP-Link TL-WR1043ND User Manual page 30

Step 2: Press and hold the WPS button of the client device.
Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected
Setup process.
Step 4: When the WPS LED is on, the client device has successfully connected to the router.
II. Enter the client device's PIN on the router
Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected
Setup PIN number.
Step 1: Keep the default WPS status as Enabled and click the Add device button in
then Figure 4-6 will appear.
Step 2: Enter the PIN number from the client device in the field on the WPS screen above. Then
click Connect button.
Step 3: "Connect successfully" will appear on the screen of Figure 4-6, which means the client
device has successfully connected to the router.
TL-WR1043ND
Figure 4-4
Figure 4-5 Add A New Device
Figure 4-6 Add A New Device
-21-
450Mbps Wireless N Gigabit Router
,
Figure 4-3