TP-Link TL-WR1043ND User Manual page 61

2. Click the Enable/Disable box to enable/disable internet access to FTP from Internet port.
3. Change the Service Port to specify a port for FTP Server to use. (The default is 21, do not
change unless necessary.)
4. Click Add New Folder to add new folders for the FTP Server. The screen will show as Figure
4-42.
Display Name - You can enter a display name for the share folder.

Share entire partition - You can select this option and then the folders contained in

this partition will all be shared.
Select - You can select this option to share the specified folder.

 upper - You can click the upper button to go into the upper folder.
 Folder - Name of folders that is in current path.
Save - You can click the Save button to save your settings and page will be redirected

to the FTP server configuration page.
Back - You can click the Back button to discard the settings and just go to the FTP

Server configuration page.
To add a new share folder for your FTP Server, please follow the instructions below:
1) Select the Share entire partition or a specific folder option.
2) Enter display name of the share folder in Display Name edit box.
3) Click the Save button to save the configuration and the screen will appear as shown in
Figure 4-43.
TL-WR1043ND
Figure 4-42 Add or Modify Share Folder
-52-
450Mbps Wireless N Gigabit Router