Change The Lan Settings; Configure To Support Iptv Service - TP-Link Archer AX10 User Manual

Chapter 12

12. 1. Change the LAN Settings

The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to
its web management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
3. Type in a new IP Address appropriate to your needs. And leave the
the default settings.
4. Click SAVE.
Note: If you have set the Port Forwarding, DMZ or DHCP address reservation, and the new LAN IP address is not in the
same subnet with the old one, then you should reconfigure these features.

12. 2. Configure to Support IPTV Service

I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
3. If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Tick the
Downloaded from ManualsNet.com
Advanced > Network
Advanced > Network
IGMP Proxy and
either V2 or V3, as required by your ISP.
search engine
> LAN.
> IPTV/VLAN.
IGMP Snooping checkbox, then select the
Customize Your Network Settings
Subnet Mask
IGMP Version,
as
59