Christie DWU951 User Manual page 31

Restrictions on Schedule function
• If the Schedule is not executed, an error message will be sent in
NOTE
accordance with the conditions set in Schedule Execution Error on Projector
Web Control. (Network Guide → 3.1.6 Alert Settings)
• If the Schedule function on the Main projector is set to turn on the power, the
projectors will be turned on according to the LAMP MODE setting.
• When the menu is displayed on one of the projectors, the Schedule function
for My Image and Messenger on the other projector will not be executed.
• Power Off in the table refers to turning off the power and entering the standby
mode according to the Intellectual Stack settings or by pressing the STANDBY
button on the remote control or STANDBY/ON button of the Main projector.
• The projectors cannot be turned on by the Schedule function on the Sub
projector. Set it on the Main projector if necessary.
29
DWU951/DHD951/DWX951/DXG1051 User's Manual - Instant Stack Guide 020-000663-02 Rev. 1 (06-2014)