Christie DWU951 User Manual page 17

• A menu to select MAIN or SUB appears on screen when a button
NOTE
on the control panel of the projector or remote control is pressed. Select the
projector that you want to operate. Refer to the examples below.
- When the MENU button is pressed, a menu to select MAIN or SUB is
displayed. If MAIN is selected, EASY MENU or ADVANCED MENU of the
Main projector is displayed.
- When one of the KEYSTONE, FOCUS + / -, ZOOM, ZOOM + / - and LENS
SHIFT buttons is pressed, a menu to select MAIN or SUB is displayed. If
MAIN is selected, each menu or dialog of the Main projector is displayed.
- When the ENTER button is pressed for three seconds, a menu to select MAIN
or SUB is displayed. If MAIN is selected, the Status Monitor on the Main
Projector can be operated.
• There are operating restrictions as
follows.
- AUTO POWER OFF and FREEZE
functions on both projectors are
disabled.
- The test patterns for CUSTOM of
GAMMA and COLOR TEMP are
not displayed.
• The screen may be darker when any
of the OSDs are displayed in PbyP or
PIP display because one of the two
projectors displays the black screen.
DWU951/DHD951/DWX951/DXG1051 User's Manual - Instant Stack Guide

Menu to select
MAIN or SUB
Menu to select
MAIN or SUB
15
STACK menu settings
Menu on Main projector

Menu on Main projector
020-000663-02 Rev. 1 (06-2014)