Christie DWU951 User Manual page 22

STACK menu settings
- MY BUTTON (Operating Guide → OPTION menu)
- TEMPLATE (Operating Guide → MENU PREFERENCES)
- SHUTTER (Operating Guide → Temporarily shading the screen)
- SHUTTER TIMER (Operating Guide → OPTION menu)
- PbyP/PIP (Operating Guide → PbyP/PIP)
- EDGE BLENDING (Operating Guide → SETUP menu)
- COLOR WHEEL (Operating Guide → IMAGE SETTINGS menu)
● The following functions are disabled.
- STANDBY MODE (Operating Guide → SETUP menu)
- AUTO SEARCH (Operating Guide → OPTION menu)
- DIRECT POWER ON (Operating Guide → OPTION menu)
- AUTO POWER OFF (Operating Guide → OPTION menu)
- COMMUNICATION TYPE (Operating Guide → OPTION menu → SERVICE
→ COMMUNICATION)
- SOURCE SKIP (Operating Guide → OPTION menu)
- LAMP MODE (Operating Guide → SETUP menu)
- ALTERNATE (Operating Guide → SETUP menu)
● LAN port cannot be selected.
● When the projectors are in the PbyP/PIP mode, the SUB INPUT SOURCE is
fixed at FOLLOW MAIN UNIT.
● When Intellectual Stack is in use, an error message will be displayed if an error
occurs on either projector.
In such case, a full dialog will be displayed on screen. The full dialog changes to
a small dialog after about 20 seconds without any key activity. While the small
dialog is displayed, pressing the ◄ button displays a full dialog again.
The numbers "1" and "2" above the projector icons represent the Main and Sub
projectors respectively.
Refer to the on-screen messages as shown below and take the necessary
actions to resolve the problem.
DWU951/DHD951/DWX951/DXG1051 User's Manual - Instant Stack Guide
20
Full dialog
Small dialog
020-000663-02 Rev. 1 (06-2014)