Christie DWU951 User Manual page 23

Example:
- Cover Error: Lamp cover is opened.
- Lamp Error: Lamp-1 and Lamp-2 do not light
up.
- Lamp-1 Warning: Lamp-1 does not light up.
- Lamp-2 Warning: Lamp-2 does not light up.
- Fan Error: Problem with cooling fan.
- Temp Error: Temperature of the projector is
too high.
- Air Flow Error: Temperature of the projector
is too high, check that the exhaust vents are
not blocked.
- Filter Error: The reading on the filter timer
exceeds the hours set in the FILTER
MESSAGE menu. (Operating Guide →
OPTION menu → SERVICE)
- Cold Error: The ambient temperature is too
low.
- Shutter Error: Shutter does not work.
- Lens Shift Error: Lens Shift does not work.
- Color Wheel Error: Color Wheel or Color
Wheel switching does not work.
- Humidity Error: Humidity is too high.
- Other Error: Errors except the above.
● If you need to turn off a projector for reasons such as taking corrective actions
for an error, turn off both the projectors so that Intellectual Stack can be started
properly when the projectors are turned on again.
● If the PIN LOCK security function on both projectors is set to ON, enter the
security code for Main first then followed by the Sub. (Operating Guide →
SECURITY menu)
DWU951/DHD951/DWX951/DXG1051 User's Manual - Instant Stack Guide
21
STACK menu settings
020-000663-02 Rev. 1 (06-2014)