Christie DWU951 User Manual page 11

3.
Adjust the image size and position of Set B with the ZOOM, FOCUS and
LENS SHIFT features such that the image can be superimposed well to the
image of Set A. (Operating Guide → Adjusting the lens)
• Fine adjustment of the image size and position thereafter with
NOTE
functions such as KEYSTONE and 3D KEYSTONE does not increase the
image size. It is therefore important to have the image of Set B completely
overlapping the image of Set A.
• When controlling Set B with the remote control, Set A may also respond to
the remote control. To avoid incorrect operations with the remote control, it is
recommended to operate with the control panel or a wired remote control. KEYLOCK
or REMOTE ID function is also available.
• If you are using Simple Stack, go to For Simple Stack users. ( 12 )
4.
Display the menu with the MENU button. (Operating Guide → Using the
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will appear on screen.
(Operating Guide → OPTION menu)
6.
Use the ▲/▼ buttons to highlight STACK MODE, and press the ► button to
display the STACK MODE dialog.
Highlight MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous
menu.
7.
After pressing the ► button, a dialog to confirm whether or not to save the
setting is displayed.
Press the ► button to complete the setting.
( 18 )
DWU951/DHD951/DWX951/DXG1051 User's Manual - Instant Stack Guide
9
Installation
020-000663-02 Rev. 1 (06-2014)