Bluetooth ® Instructions - RetroSound Model two User Manual

BLUETOOTH DEVICE INSTRUCTIONS
®
Bluetooth Instructions
®
Bluetooth Hands-Free and A2DP Streaming Operation
®
You can make or receive phone calls using a Bluetooth
phone connected to your radio, controlling basic functions via the
radio interface. During a call, the radio music source will be muted
and the call broadcast through your car speaker system. You can
also listen to music stored on a A2DP enabled Bluetooth
Pairing a Bluetooth Device
®
When connecting a Bluetooth
®
first pair the device with the unit. For most devices, pairing only
needs to be done once.
1. To pair your device first make sure the Bluetooth
function is turned on in the radio sub-menu.
2. Then, change the
BT DISCON
to make your radio discoverable (ensure
CONNEC
Bluetooth is enabled on your device).
®
3. Next, search for a new Bluetooth
phone (this may take up to 30 seconds) and select
"RETROSOUND" from the Bluetooth
4. If prompted, enter "0000" for the PIN. If successful,
" " will be displayed on the LCD screen.
PAIRING OK
The paired device will then connect to your radio automatically.
On some devices, you may need to select "SET AS AUTHORIZED" or
similar to ensure your radio will automatically pair on future usage.
PAIRED NOTIFICATION DISPLAY: When the Bluetooth
paired with your radio, the Bluetooth
LCD screen. This will occur whenever you use the system while the
paired device is within range.
enabled
®
device.
®
device for the first time, you must
®
function to
BT
device from the
®
device list.
®
device is
®
icon will appear on the
®
BLUETOOTH
Placing a Call
1. Dial the desired number on the paired phone.
2. Once dialing is in progress,
3. Once the call is in progress,
screen along with the elapsed call time (
Receiving a Call
1. If a call is incoming, any audio playback from the current
source will either be muted or paused (depending on the
source) and will be shown on the screen along
PHONE IN
with the caller ID if it is enabled by the phone/carrier.
2. To accept the call, turn the left rear
knob (#2) counter-clockwise.
Ending a Call
1. To end the call, turn the left rear knob (#2) counter-clockwise.
NOTE: We recommend mounting the microphone on the sun visor, A-pillar or steering
column inside the vehicle close to the driver. The microphone is very sensitive, and
you may speak at normal volume when using hands-free operation.
Streaming Music From Your Device
2. Once your device is paired with your radio, make
sure the source mode is set to
3. Next, select your desired playback source
on your device (iTunes , Pandora
®
play the music as you normally would.
NOTE: Some devices may allow your radio the ability to skip songs/tracks/selections
by using the right front knob (#8).
DEVICE INSTRUCTIONS
®
will appear on the screen.
CALLING
will appear on the
TALK
).
TALK 00:00
.
BT AUDIO
, etc) and
®
28