Bluetooth ® Instructions - RetroSound RetroRadio Apache User Manual

BLUETOOTH
Bluetooth Instructions
®
Bluetooth Hands-Free and A2DP Streaming Operation
®
You can make or receive phone calls using a Bluetooth
phone connected to your radio and control basic functions via
the radio interface. During a call, the radio music source will
be muted and the call will broadcast through your car speaker
system. You can also listen to music stored on a A2DP enabled
Bluetooth device.
®
Pairing a Bluetooth
When connecting a Bluetooth
first pair the device with the unit. For most devices, pairing only
needs to be done once.
1. To pair your device, first make sure the Bluetooth
is turned on in the radio sub-menu.
2. Then, change the
your radio discoverable (ensure Bluetooth
your device).
3. Next, search for a new Bluetooth
(this may take up to 30 seconds) and select "RETROSOUND"
from the Bluetooth
4. If prompted, enter "0000" for the PIN. If successful, "
will be displayed on the LCD screen.
The paired device will then connect to your radio automatically.
On some devices, you may need to select "SET AS AUTHORIZED" or
similar to ensure your radio will automatically pair on future usage.
PAIRED NOTIFICATION DISPLAY: When the Bluetooth
paired with your radio, the Bluetooth
LCD screen. This will occur whenever you use the system while the
paired device is within range.
DEVICE INSTRUCTIONS
®
Device
®
device for the first time, you must
®
function to
BT DISCON
device list.
®
BT CONNECT
is enabled on
®
device from the phone
®
®
icon will appear on the
®
Copyright © 2019 Retro Manufacturing, LLC
enabled
®
function
®
to make
"
PAIRING OK
device is
24