RetroSound Model two User Manual page 12

OPERATING YOUR RADIO
Display Color (SCAN)
This sub-menu allows you to change the display color.
To customize your own display color, look for the word
the sub-menu, then rotate the knob and select
color menu, and press the right front knob once. This will allow you
to edit the RGB values for 32,000 color variations. Turn the knob
(#8) to adjust the reds. Once a color is selected, press the same
knob (#8) to move to the greens. Repeat this process to adjust the
greens and the blues.
Note: If you lower all RGB settings down to "00" the display will go black, and you will
need to reset the radio by disconnecting all power from the unit for 2 minutes. This will
reset your radio back to the factory defaults.
Dimmer High/Low
This sub-menu allows you to adjust the radio's display brightness
between high ( ) and low (
DIMM HIGH
Bluetooth ON/OFF (BT)
®
This sub-menu turns Bluetooth on or off. Bluetooth
®
in order to connect a Bluetooth
®
streaming audio.
Bluetooth Connect/Disconnect
®
This sub-menu allows the radio to be discoverable on your Bluetooth
device. Choose to allow your device to connect, and
BT CONNEC
to disable Bluetooth connections.
DISCON ®
To connect your device, choose
"RETROSOUND" in your phone's Bluetooth
Enter password "0000" if prompted.
in
SCAN
in the preset
USER
).
DIMM LOW
must be enabled
®
device for hands-free operation or
BT
, then search for
BT CONNEC
device list.
®
Radio Data System (RDS) ON/OFF
This sub-menu allows you to turn on or off the RDS function. The
default is
RDS ON
RDS tuners can automatically tune in stations according to the style
of music (or talk) they broadcast. Some RDS tuners can even break in
with traffic alerts or emergency broadcasts.
RDS enables your receiver to display text messages (usually call letters
and format info) that many FM stations include on a sub-carrier signal
within their normal broadcast signal.
The RDS function is always active, and if the FM station you are
listening to is broadcasting RDS information, the radio station call
letters, song info, artist info and other messages will appear. Not all FM
stations use RDS nor will all RDS functions work in the US.
Program Type (PTY)
This sub-menu only works in Europe (
up to 31 pre-defined program types allowing you to find similar
programming by genre.
To change your program type, first make sure the tuner is set to
. Then cycle through the sub-menu system until you see
EUR
press the left front knob to activate, then turn the right front knob to
select from the program type list. Simply allow the menu to time out
and your selection will be enabled.
Now you will see
®
radio is searching the FM band for stations with your selected
program type. If none are found, you will see
screen, and it will revert back to the last station selected.
OPERATING YOUR RADIO
.
) and allows you select
AREA EUR
on the screen which indicates that the
PTY SEEK
NONE FOUND
AREA
. Now
PTY
on the
22