Precautions - RetroSound Model two User Manual

PRECAUTIONS

PLEASE OBSERVE THESE PRECAUTIONS WHEN INSTALLING
AND USING THIS UNIT:
This user's manual does not cover all possible installation scenarios.
If you feel you can't install this unit yourself, please take it to a local
car audio professional. If you have questions about installing your
radio, contact us at support@retrosound.com or call us
at 888.325.1555.
• Do not disassemble or modify the unit or attempt to
repair the unit yourself. If the unit needs to be repaired,
consult your dealer or Retro Manufacturing, LLC.
• Do not use the unit when it is out of order. If the unit is out of
order or is in an abnormal state (has foreign objects in it, is
exposed to water, is smoking or smells), turn it off immediately
and consult your dealer or Retro Manufacturing, LLC.
• Refer fuse replacement to qualified service personnel.
When the fuse blows, eliminate the cause and have it
replaced by a qualified service technician with the fuse
prescribed for this unit. Incorrect replacement of the fuse
may lead to smoke, fire and damage to the unit.
• If the unit does not turn on, check the connections first. Then
check the fuse in your vehicle's fuse box and the fuse at
the unit's wiring harness. Do not expose the unit to direct
sunlight or excessive heat. Excessive heat will raise the
interior temperature of the unit, which may damage it.
• Do not use the unit where it is exposed to moisture or dust.
Exposure of the unit to moisture or dust may lead to smoke, fire
or other damage to the unit and will void your warranty. Make
sure the unit does not get wet in car washes or on rainy days.
• Refer wiring and installation to qualified service personnel.
Installation of this unit requires special skills and experience.
For maximum safety, have it installed by your dealer or
qualified service professional. Retro Manufacturing, LLC
is not liable for any problems resulting from improper
installation of the unit. Please be sure to follow the
instructions carefully while attempting installation.
• Follow instructions to wire the unit. Failure to follow the instructions
could cause damage to the unit, fire, injury or death.
• Be careful not to damage the leads. Prevent them from
being caught in the vehicle chassis or from being damaged
by screws or moving parts such as seat rails. Do not scratch,
pull, bend or twist the leads. Do not install them near heat
sources or place heavy objects on them. If leads must
be routed around sharp metal edges, protect them by
wrapping them with vinyl tape or similar protections.
NOTE: Cutting the main wire harness, antenna lead, USB or auxiliary cables will
void the warranty of your radio.
• Use the designated parts and appropriate tools
to install this unit. The use of parts other than those
supplied may result in internal damage to the unit.
• Do not interfere with safety-related vehicle components.
Do not wire or affix this unit to the fuel tank, brakes,
suspension, steering wheel, pedals, etc. Check for electric
wiring, piping and other items before installing the unit.
• Never install the unit in a location where it
interferes with your field of vision.
PRECAUTIONS
6