Bluetooth ® Instructions - RetroSound Apache User Manual

BLUETOOTH
Bluetooth
Bluetooth Hands-Free and A2DP Streaming Operation
®
You can make or receive phone calls using a Bluetooth
phone connected to your radio, controlling basic functions via the
radio interface. During a call, the radio music source will be muted
and the call broadcast through your car speaker system. You can
also listen to music stored on a A2DP enabled Bluetooth
Pairing a Bluetooth
When connecting a Bluetooth
first pair the device with the unit. For most devices, pairing only
needs to be done once.
1. To pair your device first make sure the Bluetooth
function is turned on in the radio sub-menu.
2. Then, change the
CONNEC
Bluetooth
3. Next, search for a new Bluetooth
phone (this may take up to 30 seconds) and select
"RETROSOUND" from the Bluetooth
4. If prompted, enter "0000" for the PIN. If successful,
"
PAIRING OK
The paired device will then connect to your radio automatically.
On some devices, you may need to select "SET AS AUTHORIZED" or
similar to ensure your radio will automatically pair on future usage.
PAIRED NOTIFICATION DISPLAY: When the Bluetooth
paired with your radio, the Bluetooth
LCD screen. This will occur whenever you use the system while the
paired device is within range.
27
DEVICE INSTRUCTIONS
®
Instructions
®
Device
®
BT DISCON
to make your radio discoverable (ensure
is enabled on your device).
®
" will be displayed on the LCD screen.
device for the first time, you must
®
function to
BT
device from the
®
device list.
®
icon will appear on the
®
enabled
®
device.
®
®
device is
®