System Settings - RetroSound Model two User Manual

OPERATING YOUR RADIO
Middle Crossover Frequency
This sub-menu ( ) allows adjustment of the frequency
Mid 1.0K
crossover of the mid signals between 0.5KHz, 1.0KHz, 1.5KHz
or 2.5KHz.
Treble Crossover Frequency
This sub-menu ( ) allows adjustment of the
TRE 10.0K
frequency crossover of the treble signals between
10.0KHz, 12.5KHz, 15.0KHz or 17.5KHz.

System Settings

The System Settings sub-menu system enables access to the
numerous additional features of your radio. Press and hold the right
front knob (#8) for three seconds to access the sub-menu system.
Then repeatedly press the right front knob (#8) to scroll through the
available sub-menu options. Once in a specific sub-menu, turn the
right front knob either clockwise or counter-clockwise to change
options.
Auto Seek/Manual
This sub-menu allows you to select either
when listening to the radio. In Auto Seek mode the radio will tune to
the next available station when tuning.
A Store
This sub-menu will automatically fill FM pre-sets on all three FM bands
of six pre-sets each (eighteen total pre-sets) with the strongest stations.
To activate this feature, once in the system settings, press the right
front knob (#1) until appears on the screen, then press the left
A STORE
front knob to activate. This process can take up to one minute.
or tuning
Auto Seek Manual
OPERATING YOUR RADIO
Local/Distant
This sub-menu changes the sensitivity of the FM tuner. When
listening to the FM tuner, selecting between
aid in listening to weak FM stations or compensate for stations that
have too strong a signal.
Clock
This sub-menu allows you to set the clock. To adjust hours, turn the
right front knob (#8) clockwise. Adjusting past
PM indicators. Once the hour is set, press the right front knob to adjust
minutes. Once minutes are set, press the right front knob to access
the 12/24 menu.
Clock 12/24
This sub-menu allows you to adjust the clock from a twelve hour clock
to a twenty-four hour clock. The factory default setting is for a twelve
hour clock ( ).
CLK 12
Display Frequency/Clock
This sub-menu allows you to adjust the priority screen view between
radio frequency ( ) and clock (
DISP FREQ
Clock ON/OFF
This sub-menu allows you to turn off the clock when the radio is off.
Default is .
CLK ON
Beep On/Off
This sub-menu controls the audible beep confirmation that sounds
during operation of the radio. Select
beep, and to disable the audible beep.
BEEP OFF
and can
LOCAL DISTANT
will toggle the AM/
12
).
CLK
to hear the audible
BEEP ON
20