Removing Trim Waste (Inner Booklet Trimmer-A1) - Canon imagerunner advance 8205 Operation Manual

Removing Trim Waste (Inner
Booklet Trimmer-A1)
This section describes how to remove the trim waste from the trim waste tray.
When the trim waste tray of the Inner Booklet Trimmer-A1 becomes full, a screen prompting you to remove the trim waste
appears on the touch panel display. Follow the procedure described below to remove the trim waste.
Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to
replace a staple cartridge, discard the punch waste/trim waste/staple waste, or clear paper or staple jams, prints may still be
output if other optional units are operating normally, and are not involved in the paper or staple jam removal procedure.
• This procedure is necessary only if the Inner Booklet Trimmer-A1 is attached to the Booklet Finisher-N1.
• When the trim waste tray is full, you cannot make copies or prints using the Trim mode.
• For more information on the procedure for removing trim waste when the Booklet Finisher-Q1 PRO and Booklet Trimmer-D1
are attached, consult the instruction manuals that come with the optional products.
Open the front cover of the fi nisher.
1
Pull out the trim waste tray.
2
116