Canon i9900 Series Quick Start Manual
Canon i9900 Series Quick Start Manual

Canon i9900 Series Quick Start Manual

Photo printer
Hide thumbs Also See for i9900 Series:

Advertisement

9900
i
Series
Photo Printer

Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for Canon i9900 Series

  • Page 1: Quick Start Guide

    9900 Series Photo Printer Quick Start Guide...
  • Page 2: Getting Help From Canon

    CarePAK offers toll-free Canon technical support and includes Canon’s superb InstantExchange product replacement program. For further information about extending your Canon service and support, call (1-800-385-2155), or visit our Web site at www.canonesp.com. CarePAK must be purchased during your product’s warranty period.
  • Page 3 Series Series Series Series Photo Printer Photo Printer Photo Printer Photo Printer Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide...
  • Page 4 Copyright Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.
  • Page 5: Table Of Contents

    CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only) ....... . .
  • Page 6: Basic Printing

    Basic Printing Basic Printing Basic Printing Basic Printing Basic Printing This Quick Start Guide describes some of the features of your i9900 Note printer and how to use them. For more information, view the i9900 User's Guide on the Setup Software & User's Guide CD-ROM . You can also access the online help in either of the following ways depending on your operating system: •...
  • Page 7: Loading Paper

    • Damp paper • Excessively thin paper (less than 64 gsm or 17 lb) • Excessively thick paper* (more than 105 gsm or 28 lb) *non-Canon branded paper • Picture postcards • Postcards affixed with photos or stickers • Envelopes with double flaps •...
  • Page 8 Loading the Print Media This section describes how to load plain paper into your printer. • For detailed information on the specialty media Canon provides for use with its various printers, refer to the section “Using Specialty Media • Consult the User’s Guide for detailed instructions on how to load envelopes and specialty media into the printer.
  • Page 9 Load the paper. (1) Insert the paper into the Auto Sheet Feeder with the print side facing up. When loading the " " paper, load sheets in the portrait position (short side facing down). (3) Pinch the paper guide and slide it against the left side of the stack of paper.
  • Page 10: Using Specialty Media

    Basic Printing Using Specialty Media Canon recommends that you use genuine Canon media to ensure optimal print quality. Photo Quality Media • Photo Paper Pro • Photo Paper Pro (Perforated) • Photo Paper Plus Glossy • Photo Paper Plus Semi-gloss •...
  • Page 11 Canon Specialty Media Media Type Photo Paper Pro Photo Paper Pro (Perforated) 4" x 6": up to 20 sheets Photo Paper Plus Glossy Photo Paper Plus Semi-gloss Letter: up to 10 sheets Matte Photo Paper Glossy Photo Paper High Resolution Paper...
  • Page 12: Caring For Your Photographs

    While many of these variables cannot be controlled, there are basic measures that you can take to prolong image quality: • Use Canon Photo Paper Pro and genuine Canon inks. Canon Photo Paper Pro is available in A3+ size (13" x 19") and letter size (8 for Borderless Printing is available in photo size (4"...
  • Page 13: Printing With Windows

    Print from the application software's File Print The print print dialog box opens. print print Basic Printing File menu. File File (2) Ensure that Canon Canon i9900 i9900 Canon Canon i9900 i9900 is selected. (3) Click Preferences Preferences or Preferences Preferences Properties.
  • Page 14 Basic Printing Specify the required settings. From the Page Setup Note printed. To adjust Print Quality settings, select Custom Main tab. You can control the print quality in the Set Print Quality Main Main Main dialog box. For details about other printer driver functions, refer to the User’s Guide or Help Select Preview before printing displays a preview screen that allows you to confirm the selected...
  • Page 15 Print the document. You can cancel a print job in progress by simply pressing the Notes RESUME/CANCEL RESUME/CANCEL RESUME/CANCEL RESUME/CANCEL button on the printer. Click Cancel Printing BJ Status Monitor BJ Status Monitor BJ Status Monitor BJ Status Monitor, Click ! ! ! ! on Task Tray BJ Status Monitor BJ Status Monitor BJ Status Monitor...
  • Page 16: Printing With Macintosh

    Basic Printing Printing with Macintosh The menu screens and dialog boxes that appear may vary, depending on the Notes software application you are using. The steps described in this section are for printing in Mac OS X v.10.2.x. Create a document or open a file to print. Select Paper Size Paper Size.
  • Page 17 Basic Printing (2) Select Quality & Media Quality & Media from Quality & Media Quality & Media the pull-down menu. (3) Select the desired media type from the Media Type Media Type pull-down Media Type Media Type menu. (4) Select Color Options Color Options from the Color Options Color Options...
  • Page 18 Basic Printing For details about other printer driver functions, refer to the User’s Notes Guide or Help The print settings are automatically changed according to the type of paper loaded in the printer, if Plain Paper Media Type. Media Type Media Type Media Type This function may not work properly for some media.
  • Page 19: Advanced Printing

    Canon “Bubble Jet Direct” allows you to print photos from a Canon “Bubble Jet Direct” compatible (“PictBridge” incompatible) digital camera or digital camcorder without a computer, by simply connecting the digital camera or digital camcorder to this printer.
  • Page 20 Advanced Printing When printing photos with the digital camera connected to the Note printer, it is advisable to use the AC adapter supplied with the camera. If you use the camera battery, be sure to charge it fully. The print head cannot be aligned using the controls of the digital camera.
  • Page 21 The settings explained below cannot be made on some camera. If any setting cannot be made, the default setting explained above is used. Names of settings that are displayed on Canon PictBridge-compatible cameras are used in the description given below. Different names may be displayed on your camera depending on the brand or model.
  • Page 22 8.5"×11" (Letter) 5"×7" About “Image optimize” If you use a Canon PictBridge-compatible camera, you can select "VIVID", "NR", or "VIVID+NR". (Note that these options cannot be selected for some models.) When "VIVID" is selected, green and blue portions of photos are Note printed vividly.
  • Page 23: Compatible Digital Camera

    Printing Photographs Directly from a Canon “Bubble Jet Direct” compatible digital camera Media Types for Digital Camera When you connect a digital camera, you can use the following media: Digital Camera Setting Card #1 Card #2 Card #3 For the digital camera operation method and troubleshooting, refer Note to your digital camera manual.
  • Page 24: Accessing The Printer Driver

    Program In your application, select the command to print a document. The Print Print dialog box can usually be opened by selecting Print Print Print Ensure that Canon Canon i9900 Canon Canon The Printer Properties Printer Properties dialog box opens.
  • Page 25: Adjusting The Print Quality For Photographs

    Using recommended Canon paper, specialty media and inks for printing photographs can significantly improve the quality of your printouts. See the inside back cover for a list of Canon Specialty Papers and ink tanks for this printer. Printer Driver Settings...
  • Page 26 Advanced Printing To manually adjust Print Quality settings: To manually adjust Print Quality settings: To manually adjust Print Quality settings: To manually adjust Print Quality settings: Open the Printer Properties Printer Properties dialog box. Printer Properties Printer Properties See“Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application...
  • Page 27 When the process is complete, click Print To automatically optimize the image: To automatically optimize the image: To automatically optimize the image: To automatically optimize the image: Photo Optimizer PRO automatically adjusts the photographs taken with a digital camera. Use this feature to compensate for unsatisfactory color balance and over- or under- exposure before printing.
  • Page 28 Advanced Printing To use Vivid Photo option: To use Vivid Photo option: To use Vivid Photo option: To use Vivid Photo option: Vivid Photo intensifies background colors like fields, trees, oceans and skies, while maintaining natural skin tones in the images. To use Vivid Photo, select the Vivid Photo In Windows Me or Windows 98 In Windows Me or Windows 98...
  • Page 29 To reduce noise from images taken with a digital camera: To reduce noise from images taken with a digital camera: To reduce noise from images taken with a digital camera: To reduce noise from images taken with a digital camera: The Photo Noise Reduction function reduces noise from blue portions such as the sky, and dark portions of the images taken with your digital camera.
  • Page 30: Saving And Recalling Driver Settings

    Advanced Printing Saving and Recalling Driver Settings When you change printer driver settings for a specific print job, such as printing black and white photos, or printing documents with a special background, you can save and name these settings for future use on similar print jobs. Open the Printer Properties Printer Properties Printer Properties dialog box.
  • Page 31 You can retrieve or delete the print settings profile at any time. Note Retrieving profile: Select the desired profile from Printing Retrieving profile: Retrieving profile: Retrieving profile: Profiles, Profiles, and click Retrieve Profiles, Profiles, Deleting unwanted profile: Select the desired profile from Deleting unwanted profile: Deleting unwanted profile: Deleting unwanted profile:...
  • Page 32 Advanced Printing Notes You can retrieve or change the saved driver settings at any time. Retrieving print settings: Retrieving print settings: Retrieving print settings: Retrieving print settings: Select the name of the print settings to retrieve from the Presets in the Print Presets Print dialog.
  • Page 33: Using The Printer Driver Options

    Using the Printer Driver Options Your printer driver will provide you with many features that allow you to print a wide range of images and documents. The illustrations below provide a basic introduction to many features offered by your printer driver.
  • Page 34 Advanced Printing Resizing the Image by Selecting the Scaling Ratio Reducing the Sound of Printer Operation Adding Illustrated Effect to Documents...
  • Page 35: Using The Bundled Software

    Canon BJ Printers support Exif Print and use a suitable photo application to read the camera data precisely, producing optimal prints. This enables you to create prints that reproduce your vision more accurately than ever before.
  • Page 36: Printing Borderless Photographs With Windows

    Image Selection tab is displayed. Select photographs. (1) Select the folder containing the photograph you want to print. All photographs in the selected folder are displayed. All Programs (or Programs Programs), Canon Utilities All Programs All Programs Programs Programs Canon Utilities, Easy-PhotoPrint...
  • Page 37 (2) Click the [ print and specify the number of copies. Select the paper. Select the layout. ] button on the thumbnail of the photograph you want to Increases the number of copies. Displays the specified number of copies. Decreases the number of copies. Advanced Printing Guidance Thumbnail...
  • Page 38 Advanced Printing (3) Load the media specified in the Paper Selection (4) Click Print Print Print Print. (1) Click the Layout/Print tab. (2) Select Borderless (full) Paper Selection Paper Selection Paper Selection tab. Layout/Print Layout/Print Layout/Print Borderless (full). Borderless (full) Borderless (full)
  • Page 39: Printing Borderless Photographs With Macintosh

    Printing Borderless Photographs with Macintosh This chapter describes the steps used to print from Easy-PhotoPrint* included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode. * If you use Mac OS 9.x, CarbonLib 1.3.1 or later must be installed. Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing...
  • Page 40 Advanced Printing Select photographs. (1) Select the folder containing the photograph you want to print. All photographs in the selected folder are displayed. (2) Click the [ print and specify the number of copies. ] button on the thumbnail of the photograph you want to Increases the number of copies.
  • Page 41 Select the paper. Select the layout. (3) Load the media specified in the Paper Selection (4) Click Print Print. Print Print (5) When the confirmation message is displayed, click OK (6) Click Print Print Print in the Print Print Paper Selection tab. Paper Selection Paper Selection Print dialog box.
  • Page 42: Printing Maintenance

    Printing Maintenance Printing Maintenance Printing Maintenance Printing Maintenance Printing Maintenance Replacing an Ink Tank When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position.
  • Page 43: Knowing When To Replace Ink Tank

    Knowing When to Replace Ink Tank If an ink tank needs replacing, the POWER flash four times, as soon as printing begins. It is important to quickly identify the empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and replace it.
  • Page 44 Printing Maintenance The following message is displayed when an ink tank is empty. Printing will resume as soon as the ink tank is replaced and the front cover is closed. When Low Ink is Detected Note Press the RESUME/CANCEL RESUME/CANCEL button to resume printing RESUME/CANCEL RESUME/CANCEL with the ink tank empty.
  • Page 45: Replacing Ink Tanks

    Replacing Ink Tanks When an ink tank runs out of ink, replace it using the following steps. Ensure that the printer is on, and then open the front cover. The print head holder moves to the center. Remove the empty ink tank. (1) Push the tab and remove the ink tank.
  • Page 46 Printing Maintenance Important Be sure to remove the clear film from the ink tank in the exact order shown in step 3-(1), as failure to follow this step may cause the ink to leak and stain your clothes and hands. Ensure that all the orange tape has been peeled off along the perforation.
  • Page 47: When Printing Becomes Faint Or Colors Are Incorrect

    When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the print head nozzles are probably clogged. Follow the procedures below to maintain the print head. If the ruled lines are shifted after running the print head maintenance, align print head.
  • Page 48: Printing The Nozzle Check Pattern

    Printing Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Use this function when printed results are blurred or the color is incorrect. Nozzle check pattern printing can also be executed from the printer Note itself.
  • Page 49 (6) If you want to start print head cleaning, click Cleaning screen. Otherwise, click Exit With the printer on, load a sheet of Letter-sized paper in the printer. Open the BJ Printer Utility BJ Printer Utility BJ Printer Utility dialog box. BJ Printer Utility (1) Double-click the hard disk icon where the printer driver is installed, then the Applications...
  • Page 50: Examining The Nozzle Check Pattern

    Printing Maintenance Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer. The nozzle check pattern will not be printed correctly if there is not Note enough ink.
  • Page 51 Compare the printed nozzle check pattern with those shown in the Pattern Check dialog box on your screen. Printing Maintenance Pattern Check Pattern Check Pattern Check (1) If these patterns have white stripes, Group 1 print head nozzles need cleaning. Click Cleaning to go to the Cleaning Cleaning...
  • Page 52: Print Head Cleaning

    Printing Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print head consumes ink, so perform print head cleaning only when necessary. The print head can also be cleaned from the printer itself. With the Note printer on, hold the RESUME/CANCEL flashes once.
  • Page 53 (5) When the confirmation message is displayed, click OK Important Do not perform any other operation until the print head cleaning finishes. This takes about one minute. (6) Print the nozzle check pattern to check the print head condition. See “Printing the Nozzle Check Pattern” “Printing the Nozzle Check Pattern”...
  • Page 54 Printing Maintenance Cleaning Cleaning dialog box of step 3-(3) directly appears when you click Cleaning Cleaning Note Cleaning Cleaning on Pattern Check Cleaning Cleaning Pattern Check Pattern Check dialog box. Pattern Check Ensure that the printer is on. Open the BJ Printer Utility BJ Printer Utility BJ Printer Utility dialog box.
  • Page 55 (5) When the confirmation message is displayed, click OK (6) Print the nozzle check pattern to check the print head condition. See “Printing the Nozzle Check Pattern” “Printing the Nozzle Check Pattern” on page 50. “Printing the Nozzle Check Pattern” “Printing the Nozzle Check Pattern”...
  • Page 56: Print Head Deep Cleaning

    Printing Maintenance Print Head Deep Cleaning If print quality does not improve by standard print head cleaning, try performing print head deep cleaning, which is a more powerful process. Print head deep cleaning consumes ink, so perform this procedure only when necessary. Ensure that the printer is on.
  • Page 57 (5) When the confirmation message is displayed, click OK Print head deep cleaning starts when the Power Important Do not perform any other operation until the print head cleaning finishes. This takes about two minutes. (6) Print the nozzle check pattern to check the print head condition. See “Printing the Nozzle Check Pattern”...
  • Page 58 Printing Maintenance Ensure that the printer is on. Open the BJ Printer Utility BJ Printer Utility dialog box. BJ Printer Utility BJ Printer Utility (1) Double-click the hard disk icon where the printer driver is installed, the Applications Applications folder, and then the Utilities Applications Applications (2) Double-click the Print Center...
  • Page 59 (5) When the confirmation message is displayed, click OK Print head deep cleaning starts when the Power Important Do not perform any other operation until the print head cleaning finishes. This takes about two minutes. (6) Print the nozzle check pattern to check the print head condition. See “Printing the Nozzle Check Pattern”...
  • Page 60: Aligning The Print Head

    Printing Maintenance Aligning the Print Head Aligning the print head position allows you to print without shifts in the color registration. Print head alignment is performed either manually or semi-automatically (simple head alignment). This section deals with the manual print head alignment that allows you to precisely align the print head.
  • Page 61 Printing Maintenance Select Align heads manually Align heads manually Align heads manually check Align heads manually box, and then click Send Send. Send Send When the confirmation message is displayed, click OK Click Print Head Alignment Print Head Alignment. Print Head Alignment Print Head Alignment When the confirmation message is displayed, click Print Head Alignment...
  • Page 62 Printing Maintenance Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter their numbers. Enter the numbers. Click OK Click OK...
  • Page 63 With the printer on, load a sheet of Letter-sized paper in the printer. Open the BJ BJ BJ BJ Printer Utility Printer Utility dialog box. Printer Utility Printer Utility (1) Double-click the hard disk icon where the printer driver is installed, the Applications Applications folder, and then the Utilities Applications...
  • Page 64 Printing Maintenance Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter their numbers. (5) When the confirmation message is displayed, click Print Head Alignment Alignment. Alignment Alignment Click Check Setting Note print the current...
  • Page 65: Troubleshooting

    Troubleshooting Troubleshooting Troubleshooting Troubleshooting This section provides troubleshooting tips for the most common printing problems. Troubleshooting usually falls into one of the following categories. • “Cannot Install the Printer Driver Cannot Install the Printer Driver” on page 62. Cannot Install the Printer Driver Cannot Install the Printer Driver •...
  • Page 66: Cannot Install The Printer Driver

    Troubleshooting Cannot Install the Printer Driver Problem Possible Cause Cannot Install the Installation Printer Driver procedure is not followed correctly Other applications are running in the background Installation does not start automatically when the CD-ROM is inserted into the drive Installation CD- ROM is not working properly...
  • Page 67: The Usb 2.0 Hi-Speed Connection Does Not Work Properly

    The USB 2.0 Hi-speed Connection Does Not Work Properly Problem Possible Cause You connect to a computer that does When you not support USB connect to a 2.0 Hi-Speed. computer running Windows XP, the screen shows the warning message “High-SPEED USB Device Plugged into non-High- SPEED USB Hub”.
  • Page 68: Print Quality Is Poor Or Contains Errors

    Paper is not loaded with the print-side up Incorrect paper type Glossy photo paper other than the Canon specialty media is used Try This Check that the ink tanks are firmly seated in the print head and reseat them, if necessary.
  • Page 69: Troubleshooting

    Problem Possible Cause Ink does not eject Print Quality is not set properly/Printing is properly Blurred/Colors are Wrong/White Streaks appear Printed Paper Curls Paper is too thin or Ink Blots Color Intensity setting is too high Paper feed roller is dirty Printed Surface is Inappropriate paper is...
  • Page 70: Troubleshooting Printer Hardware

    Troubleshooting Troubleshooting Printer Hardware Problem Possible Cause Printer Does Not Print head has Start or Printer overheated due to Stops During long periods of Print Jobs continuous printing Printing high- resolution photographs and graphics Printer cable is too long You have changed the USB cable from the lower port to the upper one on...
  • Page 71 Problem Possible Cause Printer Does Not Start or Printer Connected to the Stops During computer through Print Jobs FireWire cable with other equipment Cannot Print to Incorrect page size End of Job selected Not enough free space on hard disk The size of the print data is too large After turning off the computer, other equipment, and then the printer, disconnect...
  • Page 72: Paper Does Not Feed Properly

    Troubleshooting Paper Does Not Feed Properly Problem Possible Cause Paper Does Not Inappropriate paper Feed Properly type used Paper feed roller is dirty Foreign objects inside the Auto Sheet Feeder Paper jams inside the printer Check if the paper you are printing on is too thick or curled. See “Print Media to Avoid Print Media to Avoid Print Media to Avoid”...
  • Page 73: Handling Error Messages

    Handling Error Messages When a printer error occurs, the POWER/ERROR flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Possible Cause Flashes Two flashes Printer is out of paper/Paper does not feed Three flashes...
  • Page 74 Troubleshooting Number of Possible Cause Flashes Eleven flashes Simple print head alignment failed Note POWER POWER lamp flashes POWER POWER alternately green and orange Possible causes are as follows: • Ink has run out. • Print head nozzles are clogged. •...
  • Page 75: An Error Message Appears On The Screen

    Details tab) to confirm the port settings. Port Port Details Details A USB port is selected if either USBnnn (Canon i9900) (where n is a number) is indicated. i9900 i9900 i9900 To change this setting, shut down your Windows operating system, turn off the printer, then re-connect the printer to the interface selected in the printer driver.
  • Page 76 RESUME/CANCEL button to clear the error so printing can continue. RESUME/CANCEL Contact the Customer Care Center. Simple print head alignment failed. See “Handling Error Messages Handling Error Messages” on page 69. Handling Error Messages Handling Error Messages Programs), Canon Canon i9900 i9900, and Programs Programs Canon Canon i9900 i9900 Utilities folder.
  • Page 77: Cannot Print Properly From The Digital Camera

    Cannot Print Properly from the Digital Camera The following messages may be displayed on the digital camera or digital video camcorder when images are printed directly from them. Correct the error according to the procedure below. Camera Error Message Printer in use Images are printed from the computer Printer warming up...
  • Page 78 Troubleshooting Images can be printed directly from digital cameras and digital video Notes camcorders that are compatible with this printer. If the connected digital camera or digital video camcorder is not supported, the POWER POWER lamp on the printer flashes nine times. If this happens, POWER POWER disconnect the connection cable and press the RESUME/CANCEL...
  • Page 79: Appendix

    Appendix Appendix Appendix Appendix Installing the Printer Driver When Using Mac OS 9.x When using OS other than Mac OS X (i.e. Mac OS 8.6 to 9.x), install the printer driver following the procedure below. Turn on your Mac and insert the Setup Software & User’s Guide CD-ROM . Open the Mac OS 8.6-9.x Mac OS 8.6-9.x folder on the CD-ROM, then double–click the Mac OS 8.6-9.x...
  • Page 80: User's Guide Table Of Contents

    Appendix User’s Guide Table of Contents Your printer's electronic User's Guide, located on the Setup Software and User's Guide CD- ROM , offers detailed information on the following topics. How to Use This Manual Printer Parts and Their Function Useful Printing Techniques Printing with Borderless Printing Reducing Noise from Images Taken with a Digital Camera...
  • Page 81: Specifications

    (for Borderless Printing: 329.0 mm / 13.0 in) (for Borderless Printing: 329.0 mm / 13.0 in) (for Borderless Printing: 329.0 mm / 13.0 in) (for Borderless Printing: 329.0 mm / 13.0 in) Canon extended mode Canon extended mode Canon extended mode Canon extended mode...
  • Page 82 Appendix Printer Ink Tanks: Ink Tanks: Ink Tanks: Ink Tanks: “Bubble Jet Direct” Print Compatible Paper Compatible Paper Compatible Paper Compatible Paper Layout Print Layout Print Layout Print Layout Print Print Quality Print Quality Print Quality Print Quality Effect Effect Effect Effect DPOF Functions...
  • Page 83 BJ Printer Driver Systems Requirements Use a computer on which Windows XP, Windows 2000, Use a computer on which Windows XP, Windows 2000, Use a computer on which Windows XP, Windows 2000, Use a computer on which Windows XP, Windows 2000, Windows Me, Windows 98 can operate.
  • Page 84: Safety Precautions

    Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions.
  • Page 85 Caution You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in a location that is unstable or subject to excessive vibration. Choosing a location Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration.
  • Page 86: Regulatory Information

    Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza...
  • Page 87: Canon U.s.a., Inc. Limited Warranty

    Canon USA Authorized Service Facility (“ASF”), and proven to be defective upon inspection, will be repaired, exchanged for new or comparable rebuilt parts, or exchanged for a refurbished Product, , , , as determined by the Canon USA repair Facility or the ASF.
  • Page 88 <http://www.canontechsupport.com>. Please note that under the InstantExchange program, a replacement product will be provided to you prior to your return of the defective product. Since the defective product becomes the property of Canon USA at the time of the exchange, the defective product must be returned in the shipping materials provided. If the defective product is not returned, as directed, you will be responsible for the value of the replacement product, for which Canon USA may invoice you.
  • Page 89: Index

    Camera Error Message ...73 Cancelling Print Jobs ...11, 14 Cannot Print Properly from the Digital Camera ...73 Canon “Bubble Jet Direct” compatible digital camera ...15 CANON LIMITED WARRANTY - (USA Only) ...83 Cleaning ... 48, 49, 50, 51 Connecting to a Digital Camera ...15 Deep Cleaning ...
  • Page 90 Printer Driver Setting for Media Type ... 7 Printer Properties dialog box ... 9, 20, 44, 65 Printing Borderless Photographs ...32, 35 Printing Photographs Directly from a Canon “Bubble Jet Direct” compatible digital camera ... 19 Printing Photographs Directly from a Digital Camera ... 15 Printing the Nozzle Check Pattern ...
  • Page 91: Ordering Information

    Canon eStore at 1-800-OK-CANON www.estore.usa.canon.com. ©2004 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. All other product and brand names are trademarks of their ® respective owners. As an Energy Star partner, Canon U.S.A., Inc., has determined that this product meets the Energy Star...
  • Page 92 Quick Start Guide Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Canada, Inc. 6390 Dixie Road, Mississauga, Ontario, L5T 1P7, Canada Canon Latin America, Inc. 703 Waterford Way, Suite 400, Miami, FL 33126, U.S.A.

This manual is also suitable for:

9900 - i color inkjet printer8580a001

Table of Contents