Q&A
33
When a fax fails to be sent, both
the TX Report and the Fax TX
Report are output. Is there a way to
not output the Fax TX Report?
Disable the output function for
the Fax TX Report. Specify the
following settings.
■
Disabling output of the Fax TX
Report:
1. Press
2. Press [Function Settings] [Send]
[Fax Settings].
3. Press [Fax TX Report] [Off] [OK].
Additional Information
For more information, see e-Manual >
Settings/Registration.
34
How do I print the data received
from specific destinations only?
You can set the Store/Print
Received File mode in Forwarding
Settings to print the data received
from specific destinations only.
252
(Settings/Registration).
■
Printing for Specific
Destinations Only
1. Press
(Settings/Registration).
2. Press [Function Settings] [Receive/
Forward] [Common Settings].
3. Press [Forwarding Settings]
[Register] specify the destinations in
[Conditions].
4. Set <Store/Print Received File> to 'On'
press [OK] [Close].
Forwarding to the Confidential
■
Fax Inbox for Other
Destinations
1. Press
(Settings/Registration).
2. Press [Function Settings] [Receive/
Forward] [Common Settings].
3. Press [Forwarding Settings] [Forward
w/o Conditions] specify the
Confidential Fax Inbox as the forwarding
destination.
4. Press [OK] [Close].
Additional Information
• If the Fax Memory Lock is being used,
received data is stored in the Memory RX
Inbox without being printed.
• For more information, see e-Manual >
Settings/Registration.