Canon imagerunner advance 8205 Operation Manual page 187

Turn the dial on the pressing unit (F-C6) in the direction of the arrow
10
(counterclockwise), and push it as far left as it will go.
If the pressing unit is in its proper position, this procedure is unnecessary.
The pressing unit is for ensuring a clean fold in the center of the paper to create a booklet. If the pressing unit
is not in its proper position, the paper to be saddle stitched cannot be fed to the booklet tray.
Remove any jammed paper in the output area of the saddle stitcher unit.
11
While opening the delivery guide (F-C8), remove any jammed paper.
12
1. Turn the dial on the pressing unit
(F-C6).
2. Push the pressing unit (F-C6) as far
left as it will go.
1. While pushing in the dial (F-C7),
turn it in the direction of the arrow
(clockwise) until the lamp turns
off .
2. Remove any jammed paper in the
output area of the saddle stitcher
unit.
1. Open the delivery guide (F-C8).
2. Remove any jammed paper.
187