Canon imagerunner advance 8205 Operation Manual page 113

Return the punch waste tray to its original position.
4
Always make sure to insert the punch waste tray as far as it can go, until it clicks into place.
• If the punch waste tray is not securely in place, you cannot make copies or prints in the Hole Punch mode.
• Check that the guide (F-A2) is closed before inserting the punch waste tray. If the guide is open, the punch
waste tray cannot be inserted. Close the guide as shown in the illustration below.
Close the front cover of the fi nisher.
5
When closing the front cover of the fi nisher, be careful not to get your fi ngers caught, as this may
result in personal injury.
113