Canon imagerunner advance 8205 Setup Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. imagerunner advance 8205
  6. Setup manual

Canon imagerunner advance 8205 Setup Manual

Hide thumbs Also See for imagerunner advance 8205:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Manual

Setup Guide

ENG
After you finish reading this guide, store it in a safe place for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Canon imagerunner advance 8205

Summary of Contents for Canon imagerunner advance 8205

  • Page 1: Setup Guide

    Setup Guide After you finish reading this guide, store it in a safe place for future reference.
  • Page 2 Software function, and the procedure for using system options and MEAP applications. • As we are constantly improving our products, if you need an exact specification, please contact Canon. • Screen shots used in this manual may differ from the ones you actually see.

  • Page 3: Preface

    Preface It is necessary to specify settings in advance to use some functions of the machine. Refer to “Flow of Settings for Using the Desired Functions, ” on p. 4 in this manual to check the flow of the required operations. Local Network Storing in Memory imageRUNNER ADVANCE...

  • Page 4: Flow Of Settings For Using The Desired Functions

    Flow of Settings for Using the Desired Functions This flowchart indicates the flow of settings required for using each function of the machine. After checking the flow of settings required, refer to the detailed page in this manual or the e-Manual to perform the actual setting procedure. Scan and Store These functions can First, refer to “Logging In...
  • Page 5 *1 You can print PDF files stored in advanced box, memory media or the Advanced Box of another machine on the network. To perform printing, the PS Printer Kit or Direct Print Kit (for PDF/XPS) is required. (Both the PS Printer Kit and Direct Print Kit (for PDF/XPS) require license registration.) *2 The default setting for displaying memory media is 'OFF'.

  • Page 6: Table Of Contents

    Contents Preface ............. 3 Symbols Used in This Manual .
  • Page 7 Sending a Fax ..............39 Sending Faxes .
  • Page 8 Chapter 3 Using the System Options/MEAP Applications Installing the System Options/MEAP Applications ........72 System Options/MEAP Applications .
  • Page 9 Operations Required to Use the Machine Logging In as an Administrator ......... 10 Logging In from the Machine .

  • Page 10: Logging In As An Administrator

    Logging In as an Administrator To specify the settings, you must log in to the machine as an administrator. There are two methods for logging in; logging in from the touch panel display of the machine and logging in from a computer using the Remote UI. Logging In from the Machine (p.

  • Page 11: Logging In From The Machine

    Enter the System Manager ID and System PIN → press [Log In]. Logging In from the [System Manager ID]: 7654321 [System PIN]: 7654321 (the number you enter is masked with Machine asterisks) To log in as the administrator using the touch panel display, enter the System Manager ID and System PIN as follows: System Manager ID...

  • Page 12: Logging In From A Computer

    Enter the System Manager ID and System PIN → click [Administrator Login]. Logging In from a [System Manager ID]: 7654321 [System PIN]: 7654321 Computer To log in as the administrator using the Remote UI, enter the System Manager ID and System PIN as follows: System Manager ID 7654321...

  • Page 13: Connecting To The Network

    Connecting to the Network To use functions, such as printing and sending faxes from a computer, it is necessary to first specify the settings to connect to the network on the machine. In this example, a TCP/IP network environment is used. Network Settings (p.

  • Page 14: Network Settings

    Press [Network]. Network Settings To connect to the network from the machine, specify the following settings: [Confirm Network Connection Set. Changes]: [On] [Ethernet Driver Settings] <Auto Detect>: [On] [SNMP Settings] <Use SNMP v. 1>: [On] <Get Printer Mgmt Info from Host>: [On] [Dedicated Comm.
  • Page 15 Press [Ethernet Driver Settings]. Press [On] for <Use SNMP v. 1> → [Dedicated Comm. Settings]. If the desired setting is not displayed, press to scroll to the desired setting. Specify the following settings → press [OK]. Press [On] for <Auto Detect> → [OK]. In this example, the following settings are specified: <Dedicated Community>: [On] <MIB Access Permission>: [Read Only]...
  • Page 16 Press [Dedicated Port Settings]. Press [On] → [OK]. The communication environment settings are now specified. Press [On] → [OK]. Next, refer to “Setting an IP Address,” on p. 17 to specify the settings to use the network. Press [Use Spool Function].

  • Page 17: Setting An Ip Address

    Press [TCP/IP Settings]. Setting an IP Address After connecting the machine to the network, you must specify the settings on your machine. In this example, a TCP/IP type network is used. TCP/IP Settings [Use IPv4]: [On] [IP Address Settings]: 192.168.1.21 DNS Settings [DNS Server Address Settings]: 192.168.1.22 [Host Name]: host-name...
  • Page 18 Press [On] → [OK]. Press [DHCP Option Settings]. Press [IP Address Settings]. Specify the following settings → press [OK]. In this example, the following settings are specified. <Acquire Host Name>: [On] <DNS Dynamic Update>: [Off ] Specify the following settings → press [OK]. In this example, the following values are entered: [IP Address]: 192.168.1.21 The IP address settings are now specified.
  • Page 19 Press [DNS Server Address Settings]. Enter a host name and domain name for <IPv4> → press [OK]. In this example, the following values are entered: [Host Name]: host-name [Domain Name]: organization.company.com Enter the IP address in [Primary DNS Server] for <IPv4>...
  • Page 20 Press [PING Command]. Enter an IPv4 address that exists on the network → press [Start]. In this example, ‘192.168.1.1’ is entered. Confirm the response → press [OK]. The communication environment settings are now specified. Next, refer to “Managing the Machine from a Computer,” on p. 21 to specify the settings for using the management functions from a computer.

  • Page 21: Managing The Machine From A Computer

    Managing the Machine from a Computer This section describes the operations that the administrator must perform to enable the machine to be managed from a computer screen. The Remote UI or SMS is used to manage the machine from a computer. Managing by Using the Remote UI (p.

  • Page 22: Managing By Using The Remote Ui

    Press [Remote UI]. Managing by Using the Remote UI If you use the Remote UI, you can access the machine using a Web browser to manage the machine and check its status from a computer. Preparations for Using the Remote UI To start the Remote UI, it is necessary to enable it on the machine.

  • Page 23: Managing Applications Using Sms

    Enter the System Manager ID and System PIN → click [Administrator Login]. Managing Applications [System Manager ID]: 7654321 [System PIN]: 7654321 Using SMS If you use SMS, you can manage the MEAP applications installed in the machine from the Web browser on your computer.
  • Page 24 Press [Network]. Press [Key and Certificate]. Press [TCP/IP Settings]. Select ‘Default Key’ → press [Set as the Default Key]. Press [SSL Settings]. Press [Yes]. Press [OK] → [OK]. The SSL settings are now specified. Next, specify the TCP/IP settings.
  • Page 25 Press [Use HTTP]. Enter the System Manager ID and System PIN → click [Administrator Login]. [System Manager ID]: 7654321 [System PIN]: 7654321 Press [On] → [OK]. You are now logged in to the Remote UI. Click [Service Management Service]. Press [Close]. Turn OFF the main power of the machine, and then turn ON the main power again.
  • Page 26 Enter the password → press [Log In]. In this example, ‘MeapSmsLogin’ is entered. The default password is ‘MeapSmsLogin’ (case sensitive). We recommend that you change the password after logging in to SMS. The SMS screen appears. Perform MEAP application management by confirming and installing the MEAP applications.
  • Page 27 Starting to Use the Various Functions of the Machine Sending Data ............28 Sending E-Mail/I-Faxes.

  • Page 28: Sending Data

    Sending Data You can send originals scanned on the machine using e-mail or internet fax (I-fax). In addition, you can send a scanned original to a shared computer folder. Sending E-Mail/I-Faxes (p. 29) ・Communication Settings, Authentication/Encryption, etc. ・Sending an E-Mail Original You can send files in JPEG and PDF format from the...

  • Page 29: Sending E-Mail/I-Faxes

    Press [Send]. Sending E-Mail/I-Faxes This example describes the procedure for sending a design proposal in PDF format. Settings for receiving e-mail/I-faxes must also be specified. For information on the settings, see e-Manual > Settings/Registration > Common Communication Settings for E-Mail/I-Fax. Preparations for Sending E-Mail/I-Faxes Press [E-Mail/I-Fax Settings].

  • Page 30: Sending E-Mail/I-Faxes

    Specify the following settings. Sending E-Mail/I-Faxes In this example, the following settings are specified: [SMTP Server]: 192.168.1.2 Register e-mail/I-fax destinations in the Address Book before [E-Mail Address]: xxx01@example.com sending e-mail. Storing New Addresses When sending a scanned original using e-mail, register the information for the destination.
  • Page 31 Press [Register/Edit]. Specify the following settings → press [OK]. <E-Mail Settings> In this example, the following settings are specified: [Name]: planning dept. [E-Mail Address]: xxx07@example.com Press [Register New Dest.]. The name registered here is used as a display name for the E-mail address.

  • Page 32: Sending An E-Mail Message Or I-Fax

    Sending an E-Mail Message or I-Fax Change the settings as necessary. The scanned data is sent to a destination registered in “Storing New Addresses, ” on p. 30 as an e-mail attachment. Place your originals. Press [Address Book]. Press (Start). If the [Set SMTP Authentication] screen is displayed, enter the user name and password press [OK].

  • Page 33: Sending To A Computer

    From the [Start] menu, right-click [Network] → select [Properties]. Sending to a Computer This example describes the procedure for scanning an original and sending it to a file server (computer) in PDF format. Preparations for Sending to a Computer To send data to a computer, you must specify settings for the shared folder.
  • Page 34 Click [Properties]. Select [Internet Protocol Version 4 (TCP/IPv4)] → click [Properties]. Select the following items. • [Client for Microsoft Networks] Click [Advanced] on the [General] tab. • [File and Printer Sharing for Microsoft Networks] • [Internet Protocol Version 4 (TCP/IPv4)]...
  • Page 35 Click the [WINS] tab. From the [Start] menu, right-click [Computer] → select [Manage]. Click [Local Users and Groups] in [System Tools] → right-click the [Users] folder → select [New User] from the pop-up menu. Select [Enable NetBIOS over TCP/IP] → click [OK]. Restart the computer.
  • Page 36 Specify the following settings → click [Create] → Right-click the folder → select [Share] from the [Close]. menu that appears. In this example, the following values are entered: [User Name]: user_name [Password]: password [Confirm password]: password Select the user to perform sharing with → click [Add] →...

  • Page 37: Sending To A Computer

    Press [Register/Edit]. Sending to a Computer You can send data scanned with the machine to the shared folder. Storing New Addresses Register the information for the shared folder created in “Setting a Computer, ” on p. 33 to the Address Book of the machine.

  • Page 38: Sending Data To A Computer

    Specify the following settings → press [OK]. Select [Original] → press [OK]. In this example, the following settings are specified: [Name]: Original <Protocol>: [Windows (SMB)] [Host Name]: \\user-1\share [User Name]: user_name [Password]: password • For [Host Name], enter <\\<name of your computer>\<name of the shared folder>>.

  • Page 39: Sending A Fax

    Sending a Fax Originals scanned with the machine can be sent by fax. In addition, you can send data stored in a computer using the Fax function of the machine. Sending Faxes (p. 40) ・Fax Numbers, Fax Line Settings, etc. ・Sending a Fax Original Scan...

  • Page 40: Sending Faxes

    Press [Send]. Sending Faxes This example describes the procedure for sending a fax. Preparations for Sending a To send a fax, you must specify a fax number, unit name, and other settings. In this example, the following settings are specified: Fax Number Press [Fax Settings].
  • Page 41 Select the desired line. Press [Register Unit Name]. The number of lines that appear depends on the optional equipment attached to the machine. In this example, [Line 1] is pressed. Enter a name → press [OK]. In this example, <sales dept.> is entered. Press [Register Unit Telephone Number].

  • Page 42: Printing The Tx Terminal Id

    Press [Tone] → [OK]. Press [Common Settings]. Press [Close]. Press [TX Terminal ID]. Printing the TX Terminal ID Set the machine so that information for the sender appears on sent documents. Press (Settings/Registration). Press [Function Settings]. Press [Print] → specify the following settings → press [OK].

  • Page 43: Sending Faxes

    Press [Register/Edit]. Sending Faxes Register the destination in the Address Book to send faxes to. Storing New Addresses Register the information for the destination in the Address Book. In this example, information for the “central sales dept. ” is registered in the Address Book. Press [Fax].

  • Page 44: Sending Faxes

    Specify the following settings → press [OK]. Select [central sales dept.]. In this example, the following settings are specified: [Name]: central sales dept. Fax Number: 123XXXXXXX Press (Start). If the <Original Size> screen is displayed, specify the size of the original →...

  • Page 45: Sending/Receiving Faxes Via The Remote Fax Server

    Press [Send]. Sending/Receiving Faxes via the Remote Fax Server This example describes the procedures for setting the machine that forwards the fax, the “server, ” and the machine from/to which the fax is sent, the “client. ” Preparations for Sending a Remote Fax Press [Fax Settings].

  • Page 46: Setting The Client Machine

    Press [Use Remote Fax]. Setting the Client Machine Set the IP address of the server to send using in the client machine. Press (Settings/Registration). Press [Function Settings]. Press [On] → [OK]. Press [Send]. Press [Close]. Turn OFF the main power of the machine, and then turn ON the main power again.

  • Page 47: Sending Faxes Via The Remote Fax Server

    Press [Remote Fax TX Settings]. Sending Faxes via the Remote Fax Server Send faxes using the remote fax server. Place your originals. Press [Fax]. Press [Remote Fax Server Address]. Enter the destination’s fax number using (numeric keys). In this example, <123XXXXXXX> is entered. Enter the IP address →...

  • Page 48: Preparations For Receiving A Remote Fax

    Press [Start Sending]. Press [Set Destination]. The fax is sent. Press [Register Destinations]. Preparations for Receiving a Remote Fax To receive a remote fax using the Remote Fax server, you must specify the following settings for the server machine and client machine respectively.
  • Page 49 Press [I-Fax]. Press [Receive/Forward]. Specify the following settings → press [OK]. Press [Common Settings]. In this example, the following settings are specified: [Name]: Client machine [I-Fax Address]: xxx01@example.com Press [Forwarding Settings]. Press [Close]. The I-fax address for the client machine is now registered. Next, set the forwarding settings.
  • Page 50 Press [Register]. Press [Address Book]. Select [Client machine] → press [OK]. Enter [Condition Name]. In this example, <Remote RX> is entered. Press [Forwarding Destination]. For more information on forwarding settings, see e-Manual > Fax/I-Fax Inbox. Press [Close].

  • Page 51: Setting The Client Machine

    Setting the Client Machine Press [Communication Settings]. You must specify the settings on the client machine for it to receive I-fax data forwarded from the server machine. In this example, SMTP server receive is set. Press (Settings/Registration). Press [Function Settings]. Specify the following settings →...

  • Page 52: Sending From A Computer

    (Start) → [Control Panel] → [Printer] in Click Windows. Sending from a Computer This example describes the procedure for sending a document created on a computer as a fax using the machine. • The procedure for displaying the fax driver screen may differ, depending on the applications you are using.

  • Page 53: Sending Faxes From A Computer

    Click the [Device Settings] tab → [Get Device Select the fax name to use → click [Print]. Status]. Click [OK]. The [Fax Sending Settings] dialog box is displayed. The fax environment settings are now specified. On the [Sending Settings] sheet, enter the recipient’s name and fax number →...

  • Page 54: Scanning An Original

    Scanning an Original You can use the machine as a scanner. Scanned data can be stored in a computer, the machine’s Mail Box, Advanced Box, memory media, and the Advanced Box of another imageRUNNER ADVANCE series machine that is accessible on the same network.

  • Page 55: Storing Data In A Computer

    On the CD-ROM Menu screen, click [Installation]. Storing Data in a Computer This example describes the procedure for specifying the settings required to scan and scanning an original into a computer. • Remote scanning methods may differ, depending on the applications you are using.
  • Page 56 On the [Scanner] screen, press [Online]. Click [Discover]. The scanner is now online. Scanned data from your computer can now be received. Next, set the scanner to use on your computer. Click (Start) → [Programs] → [Color Network ScanGear] → [ScanGear Tool]. Scanners on the network are automatically discovered, and the searched scanners are displayed in [Select Scanner from List].

  • Page 57: Scanning An Original

    Select [File] → [Add Clips to Organizer] → [From Scanning an Original Scanner or Camera]. The following example describes the procedure for placing The [Insert Picture from Scanner or Camera] dialog box is displayed. an original on the platen glass of the machine, and using remote scanning from your computer to paste the data into a From the [Device] drop-down list, select Color Microsoft Office Word 2007 document.

  • Page 58: Storing Data In The Machine, Memory Media, Etc

    Drag the image scanned using Microsoft Clip Organizer, and drop it into the area where you want Storing Data in the to add the image. Machine, Memory Media, Etc. This section describes the procedure for storing data in the Mail Box, Advanced Box, the Advanced Box of another machine on the same network, and memory media (hereinafter referred to as “storage locations”).

  • Page 59: Using A Mail Box

    Set <Mail Box> to ‘On’ → press [OK]. You can set a name and PIN for [Mail Box], as necessary. For information on the settings, see e-Manual > Security. Using a Mail Box To use a mail box, specify the Store Location Display Settings. Press (Settings/Registration).
  • Page 60 Press [Function Settings]. Press [Open to Public]. Press [Store/Access Files]. Press [By SMB] → [OK]. Next, specify the SMB server settings. Press [Advanced Box Settings]. Press [Preferences].
  • Page 61 Press [Network]. Turn OFF the main power of the machine, and then turn ON the main power again. The [Open to Public] setting is effective only after you restart the machine. Client Settings Set <Advanced Box/Network> to ‘On’ in [Store Location Display Settings].
  • Page 62 Press [Network Settings]. Specify the following settings → press [OK]. In this example, the following settings are specified: [Name]: images <Protocol>: [SMB] [Location]: \\192.168.1.23\share Press [Network Place Settings]. Press [Close]. The Network Place Settings are now set. Next, specify the Protocol for External Reference settings. Press [Protocol for External Reference].

  • Page 63: Using Memory Media

    Press [USB Settings]. Press [Close]. Turn OFF the main power of the machine, and then turn ON the main power again. [Store Location Display Settings] is only effective after you restart the machine. Using Memory Media To use memory media, specify Store Location Display Settings and the USB settings.

  • Page 64: Scanning An Original

    Press [Use Scan/Print Function]. Press [Close]. The USB setting is set. Next, follow the steps below to enable the scan/print functions. Press [Function Settings]. Set <Use Scan/Print Function> and <Use Print Function> to ‘On’ → press [OK]. Press [Store/Access Files]. Press [Close].
  • Page 65 Press [Scan and Store]. Press [Scan]. Change the settings as necessary. Press [Network]. Press (Start). Select the desired storage location. If the <Scan Size> screen is displayed, specify the scan size → press [OK]. Press [Start Storing]. If an authentication screen is displayed, enter the user name and password to log in.

  • Page 66: Printing An Original

    Printing an Original You can print data stored in the machine’s Mail Box, Advanced Box, memory media, or the Advanced Box of another imageRUNNER ADVANCE series machine on the network, and data created using a computer. This section describes the procedure for printing files stored in the Advanced Box of another imageRUNNER ADVANCE series machine on the network, as an example.

  • Page 67: Printing From A Computer

    (Start) → [Control Panel] → [Printer] in Click Windows. Printing from a Computer To perform printing, it is necessary to install the printer driver in a computer. • Printing methods may differ, depending on the applications you are using. For details, see the instruction manuals provided with the application software.

  • Page 68: Printing From A Computer

    Click the [Device Settings] tab → [Get Device Printing from a Computer Status]. Print documents created on your computer with the machine. The following example describes the procedure for printing a document, created using Microsoft Office Word 2007: Open the Word document you want to print → click [File] →...

  • Page 69: Printing Stored Data

    Specify the page settings, finishing modes, etc. → click [OK]. Printing Stored Data This section describes the procedure for printing files that are stored in the Advanced Box of another imageRUNNER ADVANCE series machine on the network. Preparations for Printing To print stored files, you must specify the following settings: Mail Box [Store Location Display Settings]...

  • Page 70: Printing Stored Data

    Printing Stored Data Select a file → press [Print]. You can print files stored in the Advanced Box of another imageRUNNER ADVANCE series machine on the network. Press [Access Stored Files]. If the Select Paper screen is displayed, select the paper source. Specify the settings on the Print Settings screen, as necessary.
  • Page 71 Using the System Options/MEAP Applications Installing the System Options/MEAP Applications ..... . . 72 System Options/MEAP Applications ..............73 Installing by Connecting This Machine to an Outside Network .

  • Page 72: Installing The System Options/Meap Applications

    Installing the System Options/ MEAP Applications Using the Register/Update Software function, you can install the System Options/MEAP Applications to the machine. You can use this function from both the touch panel display and the computer (Remote UI). Installing by Connecting This Delivery Server Machine to an Outside Network License Authentication/MEAP...

  • Page 73: System Options/Meap Applications

    Network, ” on p. 76. To activate the ACCESS MANAGEMENT SYSTEM , contact your local authorized Canon dealer. * This function enables you to restrict the use of various functions • For instructions on connecting to an external network, see for each user.

  • Page 74: Installing By Connecting This Machine To An Outside Network

    Press [License Access Number]. Installing by Connecting This Machine to an Outside Network If the machine is connected to an external network, you can install system options/MEAP applications via a delivery server. Install using one of the following procedures. • See “Using the Touch Panel Display to Install (Delivery), ” on p. 74. •...

  • Page 75: Using The Remote Ui To Install (Delivery)

    Select the system options and MEAP applications → Using the Remote UI to press [Install]. Install (Delivery) You can install system options/MEAP applications in the machine using the Remote UI. From the portal page of the Remote UI, click [Settings/Registration] → [License/Other] → [Register/Update Software].

  • Page 76: Installing By Not Connecting This Machine To An Outside Network

    [Counter Check] on the machine. you can download the manuals for system options/MEAP applications from your computer by accessing the URL for Access http://www.canon.com/lms/license/. the manual download site displayed on the Installation Result screen. (See “Downloading the Manuals and Related Software, ”...

  • Page 77: Installing A System Option Using The Touch Panel Display

    Installing a System Option Installing the System Using the Touch Panel Options Using the Remote UI Display (Manual) You can register a license key and install a system option in the You can install system options in the machine using the machine using the touch panel display.

  • Page 78: Installing The Meap Applications Using The Remote Ui (Manual)

    Click [Browse] → select the license file and the Installing the MEAP application file to install → click [Next]. Applications Using the Remote UI (Manual) You can install MEAP applications in the machine using the Remote UI. • The maximum number of MEAP applications that can be installed is 19.

  • Page 79: Starting The Meap Applications

    For more information on SMS, see e-Manual > MEAP. applications from the following URL. From the top page of the SMS, click [MEAP http://canon.com/fau/downloads Application Management]. • Prepare the License Access Number certificate that was included in the package.

  • Page 80: Managing Register/Update Software

    Managing Register/Update Software Using the Register/Update Software function, you can check the installation log for system options/MEAP applications and perform communication tests with the delivery server. You can use this function from both the touch panel display and the computer (Remote UI). Managing by Using the Touch Panel Display (p.

  • Page 81: Managing By Using The Touch Panel Display

    Press [Display Update Logs]. Managing by Using the Touch Panel Display You can display the installation logs and test communication using the touch panel display. Multiple users cannot use the Register/Update Software function at the same time. Displaying the Installation/ The installation logs of the system options and MEAP Update Log Using the Touch applications are displayed.

  • Page 82: Using The Touch Panel Display

    Press [Test Communication]. If ‘Failed’ is displayed on the communication test result screen, check that the network cable is connected and that the network settings are correct. If the problem is not resolved, contact your local authorized Canon dealer.

  • Page 83: Managing By Using The Remote Ui

    Click [Display Logs/Communication Test]. Managing by Using the Remote UI You can display the installation logs and test communication using the Remote UI. • Multiple users cannot use the Register/Update Software function at the same time. From the Log View drop-down list, select [Update Logs] →...

  • Page 84: Using The Remote Ui

    If ‘Failed’ is displayed on the communication test result screen, check that the network cable is connected and that the network settings are correct. If the problem is not resolved, contact your local authorized Canon dealer.

  • Page 85: Updating The Firmware

    Updating the Firmware You can update the firmware of the machine to the most recent version using the “Register/Update Software. ” Obtaining the Updating the Registering the Firmware from the Remote UI Firmware Firmware This Machine Using the Remote UI to Update (Delivery) (p.

  • Page 86: Using The Remote Ui To Update (Delivery)

    Click [Browse] → select the firmware to use for the update → click [Next]. Using the Remote UI to Update (Delivery) You can update the firmware of the machine from the Remote UI. • To perform this procedure, you need the firmware data that is distributed separately.
  • Page 88 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands (See http://www.canon-europe.com/ for details on your regional dealer)

This manual is also suitable for:

Imagerunner advance 8295Imagerunner advance 8285

Table of Contents