Two-Knife Booklet Trimmer-A1 - Canon imgaePRESS 1110+ Customer Expectation Document

6.15 Two-Knife Booklet Trimmer-A1

If the optional Two-Knife Booklet Trimmer-A1 is attached to the optional Booklet
Trimmer-D1, the customer can trim the fore edge and top/bottom edges of saddle
stitched prints for neat output.
Item
Description
Maximum Number of
*1
Sheets
Acceptable Paper Sizes
Acceptable Paper
Weights
Trimming Width
Trim Box Capacity
Conveyor Capacity
Power Source
Maximum Power
Consumption
Dimensions (H x W x D)/
Weight
*1 If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may not be output as
expected. We recommend that a thicker sheet be used for the cover sheet.
*2 The Two-Knife Booklet Trimmer-A1 does not come with a conveyor tray. It can only be used with
the optional Booklet Trimmer-D1's conveyor tray. Therefore, the conveyor capacity is the same as the
booklet trimmer's conveyor tray.
Version 3
Upper knife, reciprocating top-bottom trimmer
100 sheets (20 lb bond (80 g/m
98 sheets (20 lb bond (80 g/m
13" x 19.2", 12" x 18", 12 5/8" x 17 3/4", 11" x 17", LGL, LTRR
Weight: Plain:
Coated: 24 lb bond to 90 lb cover (80 to 240 g/m²)
Top-bottom*: 0.08" to 0.59" (2 mm to 15 mm)
*Minimum width of booklet in top and bottom directions: 7.48" (190 mm)
Approximately 1,500 sheets of trimmed strips
(width 0.59" (15 mm), LTRR paper (20 lb bond (80 g/m
(Equivalent to approximately 750 sheets)
30 booklets
*2
(40 sheets of an LTRR booklet (20 lb bond (80 g/m
0.79" (20 mm) by the Booklet Trimmer)
120 to 127 V AC, 50/60 Hz, 4 A
440 W
41" x 21 1/8" x 30 3/8" (1,040 mm x 536 mm x 770 mm)
(without conveyor and delivery trays)
Approximately 319 lb (145 kg) (without conveyor and delivery trays)
imagePRESS 1110+ Customer Expectations Document
Specifications
2
))
2
)) + 2 sheets (110 lb cover (300 g/m
14 lb bond to 110 lb cover (52 to 300 g/m²)
2
))
2
))
2
), with the width trimmed
Page 46