Canon imagerunner advance 8205 Operation Manual page 240

Q&A
11
Is there a way to prevent a
transmission error when sending a
facsimile to a new destination?
If [Confirm Entered Fax Number]
in (Settings/Registration) is
set, a screen to enter the number
for confirmation is displayed. By
entering the number again, you
can reduce the risk of transmission
error.
■ Setting procedure:
1. Press
2. Press [Function Settings]  [Send] 
[Fax Settings].
3. Press [Confirm Entered Fax Number] 
[On]  [OK].
Additional Information
• To perform this procedure, you must
have administrator privileges. For more
information, see e-Manual > Security.
• You can also restrict sending to a
destination that is not stored in the
Address Book. For more information, see
e-Manual > Security.
240
(Settings/Registration).
12
The quality of the image sent by
fax is not good.
Change the scan type or settings
according to the type of original.
Press [Preview] to check the
document before sending.
■ Setting the Original Type and
Density settings:
Press [Fax]  [Options]  specify the
settings for [Original Type] or [Density].
Text/Photo Mode Photo Mode Text Mode
■ Viewing the preview:
1. Press [Fax]  specify the destination.
2. Press [Options]  [Preview]  [Close].
3.Press (Start).
Preview Screen