Loading Paper Into The Paper Deck Unit-C1/Pod Deck Lite-A1 (Optional) - Canon imagerunner advance 8205 Operation Manual

Loading Paper into the Paper Deck Unit-C1/POD Deck Lite-A1
(Optional)
If you attach the Paper Deck Unit-C1 or POD Deck Lite-A1 to the machine, you have one additional source of paper for printing
jobs.
The Paper Deck Unit-C1 or POD Deck Lite-A1 hold up to 3,500 sheets of paper (20 lb bond (80 g/m
If the machine is in the Sleep mode (the touch panel is not displayed, and only
open the paper deck unit. In this case, press
paper deck unit.
• The Paper Deck Unit-C1 and POD Deck Lite-A1 are optional products.
• The following paper sizes can be loaded into the Paper Deck Unit-C1 or POD Deck Lite-A1:
• Paper Deck Unit-C1:LTR
• POD Deck Lite-A1 :13" x 19", 12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, and LTRR
• The paper size of the Paper Deck Unit-C1 is fi xed to LTR. For instructions on changing the paper size that can be loaded in the
Paper Deck Unit-C1, contact your local authorized Canon dealer.
Loading Paper into the Paper Deck Unit-C1/POD Deck Lite-A1
If you select the paper deck when it has no paper, or if the paper deck runs out of paper during a print job, a screen prompting
you to load paper appears on the touch panel display.
Follow the procedure below to load paper into the paper deck.
When handling paper, take care not to cut your hands on the edges of the paper.
• The following paper weight can be loaded into the Paper Deck Unit-C1 and POD Deck Lite-A1:
• Paper Deck Unit-C1 : 14 lb bond to 80 lb cover (52 to 220 g/m
• POD Deck Lite-A1 : 14 lb bond to 140 lb index (52 to 256 g/m
• If paper runs out and printing is stopped when you are printing in the Staple mode, do not remove the output sheets that are
waiting to be stapled. (Printing and stapling resume after you clear the paper jam.)
If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load
the correct paper. If you select a diff erent paper source, the remaining prints are made after you press [OK].
74
(Energy Saver) to reactivate the machine, and then press the open button on the
2 )
2 )
2 )).
(Energy Saver) is lit), you may be unable to