Canon imagerunner advance 8205 Operation Manual page 236

Q&A
Using Windows 2000
1. Right-click the new folder  click
[Sharing]  select [Share this folder].
2. Click [Permissions]  select Everyone 
click [Delete].
3. Click [Add]  add the users you want
to authorize access  select [Allow] for
[Full Control].
4. Click [OK]  [OK].
The item names may differ, depending on
the type of operating system you are using.
For more information, check the manual
documentation for the personal computer
operating system you are using.
Specifying the File Server on
■
the Touch Panel Display:
Specifying the File Server by Host Search:
1. Press [Scan and Send]  [New
Destination]  [File].
2. From the protocol drop-down list, press
[Windows (SMB)]  press [Search Host].
3. On the search criteria screen, enter the IP
address for the computer you are using
 press [Start Searching].
4. Specify the file server  confirm the
settings  press [OK].
236
■ Specifying the File Server by
Browsing:
1. Press [Scan and Send]  [New
Destination]  [File].
2. From the protocol drop-down list, press
[Windows (SMB)]  [Browse].
3. Select the work group name and file
server specify each settings  press
[OK].
Additional Information
You can use the following procedure to
check the IP address of your computer.
* The procedures may diff er, depending on the
type of operating system you are using.
1. On the [Start] menu, click [Run]  enter
<cmd>.
2. Click [OK]  enter <ipconfig>  press
[ENTER] on the keyboard.