Answering System - Panasonic KX-TG2344C Operating Instructions Manual

PQQX14041ZA.book 73 ページ ２００４年２月２０日 金曜日 午後３時３分

Answering System

Problem
The Answering System is on,
but incoming messages are
not recorded.
" " flashes and the
FULL
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
You cannot operate the
Answering System from the
base unit or the handset.
You cannot operate the
Answering System from a
touch tone phone.
You cannot erase messages.
When you play back
messages or turn on the
Answering System, the
handset and/or base unit
announces the wrong day and
time.
Troubleshooting
Cause & Remedy
• The recording time is set to "Greeting only".
Select "1 minute", "2 minutes" or "3 minutes"
(p. 23).
• Memory is full. Erase unnecessary messages
(p. 59).
• Memory is full. Erase unnecessary messages
(p. 59).
• If the handset or base unit is in use, you may
not be able to operate the Answering
System. Try again later.
• If another user is listening to messages or the
Answering System is handling a call, you
cannot operate the Answering System. Try
again later.
• Make sure you entered the correct remote
code (p. 61).
• The Answering System may not respond if
the tones are too short to activate the unit.
Press each button firmly.
• The Answering System is off. Turn it on
(p. 63).
• While another user is operating the
Answering System or a caller is leaving a
message, you cannot erase messages.
• The date and time may be set incorrectly.
Set the date and time again (p. 14).
73