Table of Contents
Advertisement
PQQX14041ZA.book 47 ページ ２００４年２月２０日 金曜日 午後３時３分
Special Features
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
[*]
Press
(TONE) before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the dialing
mode will return to pulse.
Muting Your Conversation
During a call, you can mute your phone so the other party cannot listen to you.
When muting your conversation, you can hear the other party.
Press Mute.
• "Mute" will flash.
• To release the mute, press Mute again.
• If you press [C] or [s] to switch between the receiver
and speaker, the mute will be released.
For Call Waiting Service Users
Press [FLASH/CALL WAIT] if you hear a call waiting tone during a conversation.
• The first call is put on hold and you can answer the second call.
• To return to the first caller, press [FLASH/CALL WAIT] again.
• Call Waiting service cannot be used when the first call is put on hold, or the
Answering System is handling a call.
• If this function does not operate properly, consult your telephone company for
details.
Visual Call Waiting Service
If you subscribe to both Call Display and Visual Call
Waiting services, when a second call is received while
talking, the second caller's information will be displayed.
After you hear a call waiting tone while talking, the display
shows the caller's name with the phone number and
"----Waiting-----".
• The second caller's information will not be displayed when a parallel connected
telephone is in use.
• Contact your telephone company for details about availability in your area, and to
verify that Visual Call Waiting is activated on your telephone line.
• The caller's information will only be shown on the display of the handset which is
on the outside call.
Handset
Handset
Talk
00-00-30
(VE)
K
Handset
BROWN,NANCY
555-666-7777
----Waiting-----
Mute
L
0
4
47
Advertisement
Table of Contents
