Table of Contents
Advertisement
PQQX14041ZA.book 63 ページ ２００４年２月２０日 金曜日 午後３時３分
Remote Operation from a Touch Tone Phone
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct
commands instead of using the voice menu. To end remote operation, hang up at
any time.
Direct commands
[4] :
Plays back new
messages.
[5] :
Plays back all
messages.
[1] :
Repeats the current
message.
• If pressed within the first
5 seconds of playback,
the previous message
will be played.
[2] :
Skips the current
message.
[9] :
Stops the current
operation.
• To resume, enter a direct
command within
15 seconds, or the voice
menu will start (p. 62).
To turn on the Answering System:
Call your unit and wait for 15 rings.
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the remote code for
other options.
• When turning on the Answering System using a rotary or pulse service telephone,
you cannot enter the remote code for other options.
Skipping the greeting
After calling your unit, press [
• The unit skips the rest of the greeting and you can start recording your message
after the long beep.
[
] [4] : Erases the current
*
message.
• A short beep will sound
[
] [5] : Erases all messages.
*
• A long beep will sound
[0] :
Turns off the Answering
System.
• The unit hangs up.
] during the greeting.
*
and the next message
will be played.
and "No messages" will be
heard.
63
Advertisement
Table of Contents
