Replace the bulb for the dipped and main beam (Halogen-
headlamp)
Fig. 271 Replacing the bulb for low beam and main beam
Read and observe
and
›
Remove the protective caps
B
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
›
Remove the bulb from the holder in the direction of the arrow
›
Insert a new bulb into the connector so that the lug
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow
.
2
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
›
Use the protective caps
and
B
244
Do-it-yourself
on page 243 first.
and
» Fig. 270
on page 243.
C
» Fig.
1
.
2
3
on the connector
A
» Fig. 270
on page 243.
C
Change bulb for turn signal switch (halogen headlight)
Fig. 272 Changing the bulb for the turn signal light
Read and observe
›
Remove the protective cap
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow
» Fig.
1
271.
›
Grasp the lamp socket at the places marked by arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
.
›
Push a new bulb into the bulb holder up to the stop.
›
Slide in the socket with the bulb with the fixing lug
into the recess on the reflector.
›
Fit the protective cap
and
on page 243 first.
» Fig. 270
on page 243.
A
272.
» Fig. 270
on page 243.
A
.
2
upwards so that it fits
B