Table of Contents
Advertisement
Removable ashtray
Read and observe
on page 105 first.
Removing/inserting
When removing, do not hold the ashtray on the cover.
›
Pull out the ashtray in the direction of the arrow
Insertion takes place in reverse order.
Multimedia holder
Introduction
Fig. 120 Movements and rotations of the bracket
106
Using the system
Fig. 119
Removing ashtray
» Fig.
119.
This chapter contains information on the following subjects:
Attach behind the head restraint
Mount in the storage compartment in the rear armrest
In the multimedia holder (hereinafter referred to as a holder) various external
devices (e.g. tablet, Smartphone or similar) can be attached.
The holder may be tilted 30° in the direction of arrow
360° in the direction of arrow
2
The maximum permissible load of the compartment is 750 g.
In order to use larger devices, the holder can be resized (the min. size is 122
mm, the max. size is 195 mm).
Enlarge holder
›
Raise the part
in the direction of arrow
A
The holder is unlocked.
›
Raise part
into the desired position in the direction of arrow
B
Decrease holder
›
Raise the part
in the direction of arrow
A
The holder is unlocked.
›
Depress part
in the opposite direction of the arrow
B
CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
Fig. 121
Enlarge holder
and rotated through
1
» Fig.
120.
» Fig.
121.
3
» Fig.
121.
3
.
4
107
107
.
4
Advertisement
Chapters
Table of Contents
