Table of Contents
Advertisement
To use an Automatic
programme
Select
Automatic programmes
A list of food types will appear in the
display.
Select the food category.
The Automatic programmes available
for the food type selected will then
appear.
Select the Automatic programme that
you want.
Each step you need to take before
starting the Automatic programme will
appear in the display.
In some programmes you will be
prompted on when to add food to the
oven. Follow and confirm these
instructions.
Notes on use
– The degree of doneness and
browning levels are shown in a bar
with seven segments. The factory
default is always the middle setting. It
will be highlighted. To change the
setting simply move the highlighting
to the left or the right.
– The weight entry in the Automatic
programmes refers to the weight per
piece. For example, you can cook
just one piece of salmon weighing
250 g or 10 pieces of salmon, each
weighing 250 g at the same time.
– The oven interior needs to be at room
temperature before starting an
Automatic programme.
– When placing food in an already hot
steam oven, be very careful when
opening the door. Hot steam can
.
escape. Step back from the steam
oven and wait until the steam has
dissipated. When putting cooking
containers or the condensate tray
into the oven or taking them out, take
care not to spill the contents. Avoid
contact with hot steam, and do not
touch the hot oven interior walls.
Danger of burning and scalding.
– For some Automatic programmes the
start time can be delayed using
at
– To end an automatic programme
early, you do not need to switch the
steam oven off completely. Touch .
Cancel cooking?
display. If
menu will be shown in the display.
– If by the end of an Automatic
programme the food is not cooked
enough, select
– Automatic programmes can also be
saved as
Automatic programmes
or
.
Ready at
will appear in the
Yes
is selected, the main
Continue cooking
User programmes
Start
.
.
53
Hide quick links:
Advertisement
Table of Contents
