Description Of Functions; Steam Cooking Mode; Water Container; Temperature - Miele DGM 6800 Operating And Installation Instructions

Hide thumbs Also See for DGM 6800:
Table of Contents

Advertisement

Description of functions

Steam cooking mode

Water container

The maximum water level is 1.5 litres,
the minimum 0.5 litres. These levels are
indicated on the container. Do not
exceed the maximum level.
The amount of water used will depend
on the type of food and the duration of
cooking. Water will sometimes need to
be replenished during the cooking
programme. Water consumption is
increased if the door is opened during
cooking.
At the end of the cooking programme
hot residual water in the steam
generator is pumped back into the
water container. The water container
must be emptied after each use.
The water container is removed using a
push/pull system: push gently on the
water container to remove it.

Temperature

Some functions have a default
recommended temperature. This
temperature can be altered for the
programme in use, or for every time that
programme is used (see "Settings -
Recommended temperatures").

Duration

You can set a duration between
1 minute (0:01) and 10 hours (10:00). If
the duration exceeds 59 minutes you
have to enter it in hours and minutes.
Example: duration 80 minutes = 1:20.
28

Noises

You will hear a pumping sound when
the appliance is switched on, during
use and after switching it off. This is the
sound of water being pumped through
the system and is quite normal.
When the steam oven is in use, you will
hear a fan noise.

Heating-up phase

During the heating-up phase the display
will show the temperature in the
cooking compartment as it rises and
in all programmes except
Heat-up phase
for
Automatic programmes
and
Maintenance
.
When cooking with steam, the duration
of the heating-up phase will depend on
the quantity and the temperature of the
food. In general the heating-up phase
will last for approx. 5 minutes. The
duration will be longer if you are
cooking refrigerated or frozen food.

Cooking phase

The cooking phase begins when the set
temperature is reached. During the
cooking phase, the duration remaining
will be shown in the display.
,
Menu cooking

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents