Download Print this page
Miele DG 2350 Installation Instructions Manual
Miele DG 2350 Installation Instructions Manual

Miele DG 2350 Installation Instructions Manual

Steam
Hide thumbs Also See for DG 2350:

Advertisement

Quick Links

Installation instructions

Steam oven
DG 2350
DG 2550 / DG 2560
DG 2650 / DG 2660
GiHr
To avoid the risk of accidents or
damage to the appliance it is
to read these installation
instructions before it is installed
or used for the first time.
M.-Nr. 05 949 900

Advertisement

loading

Summary of Contents for Miele DG 2350

  • Page 1: Installation Instructions

    Installation instructions Steam oven DG 2350 DG 2550 / DG 2560 DG 2650 / DG 2660 GiHr To avoid the risk of accidents or damage to the appliance it is to read these installation instructions before it is installed or used for the first time.
  • Page 2 DG 2350........
  • Page 3 This equipment is not designed for maritime use or for use in mobile The socket and on-off switch installations such as caravans, aircraft should be easily accessible after etc. However it may be suitable for the appliance has been built in. such usage subject to a risk If the appliance is supplied without assessment of the installation being...
  • Page 4 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 5 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 6 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 7 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 8 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 9 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 10 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 11 a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable...
  • Page 12 a Steam oven b Building under frame (available as an optional accessory) c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance e Mains connection cable *Dimension including plug connection...
  • Page 13 c Inlet for mains connection cable to the appliance...
  • Page 14 The appliance is supplied with four feet. If the building-in recess is high, the steam oven is installed fitting the feet. If the building-in recess is 360 mm high, the feet need to be screwed into the appliance before installing it in the recess. If the appliance is being installed in a counter top casing (DGSG) or in a building-under casing (DGUG) the feet must not be fitted.
  • Page 15 ^ Push the appliance into the recess. After aligning the appliance it must ^ Before installing the appliance secure be secured against slippage. Do this wood trim h to the left hand side of by screwing the four 3.5 x 25 mm the recess using the two 3 x 20 mm wood screws i (supplied) into the Spax screws g supplied (see...
  • Page 16 All electrical work should be carried out When switched off there must be an by a suitably qualified and competent all-pole contact gap of 3 mm in the person in strict accordance with local isolator switch (including switch, fuses and relays in accordance with EN 60 and national safety regulations.
  • Page 17 Replacement fuses and by a qualified electrician. fuse covers may be purchased from your local electrical supplier or Miele The manufacturer cannot be held liable Service Agent. for damage which is the direct or...
  • Page 20 Alteration rights reserved / 3203 M.-Nr. 05 949 900 / 02 This paper consists of cellulose which has been bleached without the use of chlorine.