IDEAL Harrier GTS 5 Installation And Servicing page 28

41 ASSEMBLING THE REAR TOP PANEL
1. Engage the location buttons on the side
panel into the keyhole slots in the top
panel and slide the panel forwards.
2. Secure the panel at the two top rear
corners with two self tapping screws and
shakeproof washers.
42 NAMEPLATE AND LEVELLING
1. Affix the identification plate
(supplied in the instructions
bag) on the casing (on the
left or right-hand side) in an
easily accessible location.
2. Check the boiler for level
and adjust the feet if
necessary.
28
INSTALLATION
2
2
1
Harrier GTS -
Installation & Servicing
1