IDEAL Harrier GTS 5 Installation And Servicing page 27

38 INSTALLING THE SENSORS AND ROUTING THE BURNER CABLE
1. Route the burner cable inside the
front edge return of one side of the
casing side panels opposite the
burner hinges. (RH side shown for
clarity)
2. Insert the sensors into the sensor
pocket.
3. Loop the sensor leads back over
the sensor pocket.
4. Secure the leads with the spring
clip.
39 ASSEMBLING THE LOWER FRONT PANEL
1. Push the panel onto the location buttons and slide the
panel downwards.
Harrier GTS -
Installation & Servicing
INSTALLATION
har9090
40 ASSEMBLING THE FRONT PANEL
1. Push the panel onto the location buttons and slide the
panel downwards.
1
4
3
1
2
27