IDEAL Harrier GTS 5 Installation And Servicing page 17

23 ASSEMBLING THE BURNER AND FLUE CLEANOUT DOORS
1. Position the Burner door in place and insert
the hinge pin.
2. Close the burner door and secure evenly
with four M12 nuts and washers.
3. Position the flue cleanout door hinge
bracket as shown and secure with two M12
nut and washers.
Note.
For left hand opening position the hinge
bracket on the left.
4. Position the flue cleanout door in place and
insert the hinge pin.
Note.
Do not close and secure the door at this time.
Harrier GTS -
Installation & Servicing
INSTALLATION
B
3
B
A
2
A
A
A
2
A
4x
M12
B
2x
M12
1
4
17