4. PRINTER TRANSPORTATION
This section describes the procedures for transporting the printer for returning after repair, etc.
1) Keep the print head and ink tank installed in the carriage.
[See Caution 1 below.]
2) Turn off the printer to securely lock the carriage in the home position. (When the printer is turned off, the carriage is
automatically locked in place.)
[See Caution 2 below.]
3) Attach the tape in 2 locations, as shown below, to fix the output tray unit.
4) Attach the left / right side packing and accessory packing to protect the printer, and set in the packing box.
Note: If the packing used when the box was opened is not available, use packing of the same grade.
[See Caution 3 below.]
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
1 - 35