Canon Selphy DS700 Service Manual page 36

Hide thumbs Also See for Selphy DS700:
Table of Contents

Advertisement

(5) Waste ink counter setting
When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste ink amount, replace the
waste ink absorber. The standard amount for waste ink absorber replacement is given in the table below.
Waste ink amount
Less than 7%
7% or more
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3-3. Adjustment / Settings, (7) Service mode.]
(6) User mode
Function
Nozzle check pattern
printing
Print head cleaning
Print head deep cleaning
Print head alignment
Print head alignment
values printing
*1
Language selection
Paper feed roller cleaning
Bottom plate cleaning
*1: Selectable from among the following 11 languages in the user mode (via TV connection and remote control operation):
<Standalone printer operation>
1) Turn on the printer.
2) Press and hold the Resume/Cancel button until the LED blinks the specified number of times listed in the table below, and
release it. The operation starts.
LED blinking
1 time
Print head cleaning
2 times
Nozzle check pattern printing
3 times
Paper feed roller cleaning
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
*1
Procedures
For procedures on standalone printers,
see "Standalone printer operation" below.
For procedures on standalone printers,
see "Standalone printer operation" below.
Available from the printer driver, or
connection to a TV.
Available from the printer driver, or
connection to a TV.
Via TV connection, select Tool Box, and
Head alignment print.
Via TV connection, select Tool Box, and
Languages.
For procedures on standalone printers,
see "Standalone printer operation" below.
For procedures on standalone printers,
see "Standalone printer operation" below.
LG = 01 Japanese
LG = 02 English 1 (mm)
LG = 03 English 2 (inch)
LG = 04 German
LG = 05 French
LG = 06 Dutch
LG = 07 Spanish
LG = 08 Portuguese
LG = 09 Italian
LG = 0A Swedish
LG = 0B Chinese
Operation
Ink absorber replacement
Not required.
Required.
Available from "Standalone printer operation,"
the printer driver, or connection to a TV.
Available from "Standalone printer operation,"
the printer driver, or connection to a TV.
Available from the printer driver, or
connection to a TV.
Available from the printer driver, or
connection to a TV.
Available only from connection to a TV.
Available only from connection to a TV.
Available only from "Standalone printer
operation."
Available only from "Standalone printer
operation."
Remarks
Set a sheet of 4" x 6"-sized paper in the ASF.
Set several sheets of Canon 4" x 6"-sized paper with the back
side facing up.
1 - 28
Remarks

Advertisement

Table of Contents
loading

Table of Contents