Canon Selphy DS700 Service Manual page 29

3) While holding the gear position in step 2), slide the access cover arm through the main cover's slot (in the direction indicated
by the blue arrows) into place.
4) Check that the access cover arm fits in place, as shown below.
5) After adjustment of the gear phase, attach the main and access cover units to the printer, and confirm the cover operation.
The cover should open properly by the cover open switch, and close and lock manually.
(3) Pump unit adjustment
When attaching the purge tube to the pump unit
- The purge tube must securely fit in the pump unit hole without any gaps. Any space or crack in location "A" in the figure
below prevents ink from being drawn properly.
- The purge tube will curve, as shown in "B" in the figure below, when assembled in the sheet feed unit.
- Align the pin to the left, as shown in "C" in the figure below.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
1 - 23