Table of Contents
Advertisement
4. PRINTER TRANSPORTATION METHOD
This section describes the procedures for transporting the printer (for returning after repair, etc.).
1.
Keep the print head and ink tanks installed in the carriage.
2.
Turn off the printer, and secure the carriage locks in the home position. (When the printer is turned off,
the carriage is automatically locked in place.)
Caution:
If the print head is removed from the printer and left alone by itself, ink (especially the pigment black ink)
is likely to dry. For this reason, keep the print head installed in the printer even during transportation.
Also, securely lock the carriage in the home position, to prevent the carriage from moving and applying
stress to the carriage flexible cable, or causing ink leakage, during transportation.
Note:
If the print head must be removed from the printer and transported alone, perform the following:
1.
Install both the black and color ink tanks (to prevent the nozzles from drying).
2.
Attach the protective cap (used when the packing was opened) to the print head (to protect the print
head face from damage due to shocks).
1 - 21
Advertisement
Table of Contents
