(2) Notes on disassembly and re-assembly
AC adapter and logic board ass'y removal
1) Remove the 4 screws indicated by the arrow in the figure below. Position the DS700 so that it stands on the output tray
unit, as shown below, to facilitate servicing.
2) Remove the DC harness ass'y, and AC adapter.
3) Remove the harnesses and cables from the logic board ass'y, leaving J402 and J501 on the left side and J601, J403, and
J302 on the right side connected so that further work can be done easily.
Note: For removal of harnesses or cables with few pins, use a pair of tweezers to avoid damaging the connectors.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
1 - 14