Canon Selphy DS700 Service Manual page 38

5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is
performed. (When the operation completes, the printer returns to the menu selection mode automatically.)
Note: To exit the service mode, press the Power button.
<Destination settings procedures>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination
listed in the table below, and press the Power button.
Time(s) LED
0 times
Green
1 time Orange
2 times Green
3 times Orange
4 times Green
5 times Orange
6 times or
Green
more
Note: After setting the destination, confirm the settings in the service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
<NTSC / PAL signal switching procedures>
In the NTSC / PAL signal settings mode, press the Resume/Cancel button the specified number of time(s) according to the TV
mode listed in the table below, and press the Power button.
Time(s)
0 times
1 time
2 times
3 times
Note: After setting the TV mode, confirm the settings in the service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Destination
No destination change
JPN
US / CA / LAM LVT / TW
EUR / GB / EUM
CN
ASA HVT / AU / HK
Return to the destination
settings mode
LED
Green
Orange
Green
Orange
<Part 1: 3. REPAIR, 3-3, (5) to (7)>
Paper size
-
01 (L) LG = 01 Japanese
02 (4x6) LG = 03 English 2 (inch)
02 (4x6) LG = 02 English 1 (mm)
02 (4x6) LG = 0B Chinese
02 (4x6) LG = 03 English 2 (inch)
-
No TV mode change
NTSC
PAL
Return to the NTSC/PAL signal settings mode
1 - 30
Language
-
-
TV mode
TV
-
NTSC
NTSC
PAL
PAL
PAL
-
To the top