CAME V700E Installation Manual page 14

Gearmotor, encoder and transformer (only for possibile maintenance)
Command and safety devices
Stop button (N.C. contact) - Stops movement, excludes the automatic closing functions. To restart
the automated kit, press a command button or a remote control button.
Key switch and/or button for partial opening (N.O. contact) - Partial opening devices
Key and/or push button selector switch (N.O. contact) - Opening and closing devices.
Command modes: open-stop-close-stop
N.C. Contact for "reopening during closing"
- Input for photocells, sensitive profi les and other devices
complying with EN 12978 standards.
During the closing phase, operating the device will invert the
motion until complete opening is achieved.
Transformer
If a device is connected up,
remove the small bridge.
If a device is connected up,
remove the small bridge.
RX
Gearmotor
24V d.c. with
encoder
TX